Warrtalon

iTrader: (6)

They're already wrapped in 285/30-18 V710s and waiting to be used. After the trans gets back from Shep, I'll get the suspension installed and tuned with the rims/tires installed. Already got all the ARP wheel studs, front spacers, and a fender roller (not mine, just borrowing from a shop), so I'm ready to roll.

Inprogress

iTrader: (30)

Do you think the wheels would look just the same if I went with the 18x8.5 with 245/40/18 tire? I really really like these wheels but 18x9.5 seems to be more then I'm willing to deal with especially considering I dont autoX or anything.

I'm loving M3this's car, but am wondering if my wicked white will look simillar with the NT03+M thats not as wide.

eddie

iTrader: (1)

http://img55.imageshack.us/img55/9535/dsc00113sh4.jpg

I think that wheel in 8.5" width have the spokes sitting proud, like the pic suggests. You loose the concave look that seems to make these wheels look so good.

Inprogress

iTrader: (30)

Oh damn it, i was hoping it wouldn't do that...oh well now back to the SA-70's and XD9's.

Thanks

Mr. Furley

iTrader: (1)

So the best setup for these wheels is +27 in front and +40 in rear?

sponge bob

iTrader: (3)

Not if you get the correct version of that wheel. Mine are 17x9.5 38mm offset and need no spacers. Tires are 275/40/17 Kumho MX. They of course need the rear fenders rolled.

EVOatSRPMar2307.jpg?t=1179974051

Warrtalon

iTrader: (6)

275/40-17s rub the suspension, though.

sponge bob

iTrader: (3)

My tires don’t rub after I set the front factory camber adjustment to minimum position. The rears are very close but don’t rub. Maybe the 275’s you used were abnormally wide or my MX’s are narrow for their size.

Balrok

iTrader: (15)

Robispec's 17x9.5 Hyper Silver 38mm - No spacers required

robi

iTrader: (24)

Got a deal on these wheels running now....call or email...evo4fun@gmail.com

robi

iTrader: (24)

so me the usdm nut ricer now (245/45/17 nittos on 10" enkeis...) lol

Balrok

iTrader: (15)

lol, streach fuller there How much better does it feel then 255?

EVO8LTW

iTrader: (41)

You may not need to run spacers up front, but it would be advantageous to do so from a track width standpoint. And if you are going to run spacers anyway, why not get a version of the wheel with the concave face for the aesthetics?

gohdunlam

iTrader: (30)

would +40 be less concave compared to +27?

http://www.evasivemotorsports.com/projects/evo/au/5.jpg
would it still look like this +27?

thanks

M3this

iTrader: (19)

Two down sides to that set up:

1) front track width isnt widened
2) ugly wheel faces (personal opinon)