Hey, I'm looking for a 18" P45R that would Fit an 05 Scion XB 4x100 bolt patern. Preferably in blue.

 

Then PM WheelDude this is a picture thread

 

I just installed Works Springs (0.9" drop in front and back) on my car. In the rear, I have no wheel gap from the top of the tire to the fender. In the front, I have about a 0.8" wheel gap from the top of the tire to the fender. Does this sound right? If the drop is equal on both sides, why is the gap bigger in the front?...

 

No....Tires are separate.

 

The factory settings give the front more wheel gap than the rear. So even though you have aftermarket springs, if they are the same length, compression, etc. you will still have a larger gap in the front.

 

Ok. So if the gap is about a 0.8" difference between the front and the back, should I just go back to stock springs in the rear since the drop is supposed to be about 0.9" to both sides with the new springs?

 

FYI, this thread is about the P45R wheel so start your own post about your issue... with this said I will try to help you, but otherwise take this to PM.

Works is known for building Evos that perform. Looks is secondary. The truth is you don't want the front as low as the back as it throws off your roll center. That and you would need stiffer springs to make up for the lowered static ride height. If you don't like the look and that's all you care about, get a different set of springs.

 

back on topic

 

anyone have any pics of these wheels in "Royal Steel Gray" I think I've seen the Hyper black color on this thread. But not the Royal Steel Gray color.

they are on this website if ya'll don't know what color I'm talking about.

http://www.subydude.com/osc/product_...d4f178ed83914a

the 3rd column 2nd one down.

 

Just put on my P45Rs this weekend, dont have pics yet but here is some fitment info:

18x9.5 e30 255/35/18 --- Lowered on Megan springs (equivalent ride height of Tein S-Techs)

Front: 8mm spacer, we tried 5 first but it was taking paint of the caliper and would not rotate smoothly.
Rear: Even with 255/35s the rear rubs on harsh bumps and dips. Put two people back there and forget about it they rub on everything.

I am looking to get my rear fenders rolled this weekend. Also looking for hubcentric spacers, non-hubcentric spacer vibrate wayy to much on the highway.

Edit: I hope hubcentric spacers will help with the vibration on the hwy, however i am not sure.

 

Some Recent P45R Pics. 18x9.5

 

^^ Looks sick. That's what my car will look like . My wheels are being shipped. I'll post pics as soon as I have them fitted and set up.

 

man I love these wheels. especially in hyper black. I ordered a set and am waiting for them

 

[QUOTE=cnoevo8;4015048]I have never posted pix of my wheels on this thread, someone else posted for me. So here goes, now that I have sold them.







anybody have more pics of the hyper black on a silver car???

 

^^^^^^^^^^ I'm torn between that color and bronze on my silver car. hard decision lol