I love these wheels on Evo's!! I ordered my set thru Subydude. So...... If u have them post up. I'll start it off with what I could find. All beautiful IMHO!! Enjoy!!

















Here's the specs.......

Suspension:
Tein S-Tech springs 2.0F - 1.0R

Wheels:
Rota P45R 18 x 9.5 et30mm

Tires:
255-35-18

Front wheels have an 8mm spacer to clear for the Brembos.

Rear wheels fit fine but under hard cornering or passengers slight rubbing. Rear fenders need to be rolled.

 

I love these wheels and the torques in 18x9.5 great thread!

 

Great collection of pics of these wheels. Anyone know what size spacer the Red RS is using up front? It seems to stick out the least from the fender compared to the other pics.

 

These wheels do deserve their own thread.

What I'd like to know is the details of the wheels on the red Evo with black rims and silver lip. They stick out the least of the group and I would want them to look like that on my Evo. Any details would be appreciated.

 

What is the color the wheel on the GG MR above? sorry im a little colorblind lol

 

These require spacers and fenders rolled correct? Front spacers to clear brembos?

Anyone know of any rubbing issues or tire ffeathering problems due to the width? (i had a tire feathering problem on my old 350z with really wide rims/tires)

 

THere is a thread on here posted by subydude i think is his name...he said the rear fenders will require rolling and spacers, i think the size he used were a 18x9 with a +25 offset?

 

It looks bronze to me...

 

The red car is a et30 offset with 5mm spacers up front, rear fenders rolled. Tires are 265-35-18.

Also he was running coilovers so the fronts were cambered in too.

 

I'm not sure if he had the 25mm offset batch or the 30mm offset batch, but all of them are 18x9.5 with either a 25mm offset or 30mm offset

Yes, 5mm spacer in the front, rear rolled fenders.

You shouldnt have tire feathering with these if you stick with a 245 or 255

 

standard bronze.

the yellow one is full royal sports bronze.

 

Can you put on any P45R's w/o fender rolling or spacers? i wanted 18x9 or 18x9.5, i have stock bilstein suspension

 

From my understanding......

This is for the P45R's......

et30 offset you can use a 5-8mm spacer up front, and in the rear if u go wider than 255 tires then u have to roll the fenders.

et25 offset you can use a 3-5mm spacer up front, and have to roll the rear fenders regardless of what size tire you run.


et30's sit in closer

et25's stick out further


Rota Torques......

Require a 15mm spacer up front and rear fenders rolled.


I hope this helps out with any confusion on how to run these setups.

 

I want these wheels in black with a polished lip for my Evo. The black wheels on a white car is pure sex!

Which red Evo are you speaking of? With the black wheels or the bronze wheels?

 

Sorry I forgot I posted more than one red one.

I was talkin about the red RS with the Black with polished lip.