The Ultimate Aggressive Wheel Thread...
#7339
hey guys I'm looking for some varrstoen es2 wheels but I'm not sure if i want 18" or 19"... i found these pics online and was wondering if anyone knew if these were 18" or 19"? thanks!
#7343
Evolving Member
#7344
Enkei RPF1's
Size: 18x9.5
Offset: +15
Camber: Rear -2.5
Tires: Yokohama S-Drive 255/35
Fender Mods: Rolled rear. Still need to do bolt relocation. Fronts haven't been touched.
Rubbing: At my current height the rear only rubs on big bumps and dips if im going fast. Doesn't rub on hard cornering.
P1080734 by steven nguyen, on Flickr
6 by steven nguyen, on Flickr
1 by steven nguyen, on Flickr
evo3 by steven nguyen, on Flickr
Size: 18x9.5
Offset: +15
Camber: Rear -2.5
Tires: Yokohama S-Drive 255/35
Fender Mods: Rolled rear. Still need to do bolt relocation. Fronts haven't been touched.
Rubbing: At my current height the rear only rubs on big bumps and dips if im going fast. Doesn't rub on hard cornering.
P1080734 by steven nguyen, on Flickr
6 by steven nguyen, on Flickr
1 by steven nguyen, on Flickr
evo3 by steven nguyen, on Flickr
#7345
EvoM Staff Alumni
iTrader: (3)
Enkei RPF1's
Size: 18x9.5
Offset: +15
Camber: Rear -2.5
Tires: Yokohama S-Drive 255/35
Fender Mods: Rolled rear. Still need to do bolt relocation. Fronts haven't been touched.
Rubbing: At my current height the rear only rubs on big bumps and dips if im going fast. Doesn't rub on hard cornering.
Size: 18x9.5
Offset: +15
Camber: Rear -2.5
Tires: Yokohama S-Drive 255/35
Fender Mods: Rolled rear. Still need to do bolt relocation. Fronts haven't been touched.
Rubbing: At my current height the rear only rubs on big bumps and dips if im going fast. Doesn't rub on hard cornering.
Secondly, a good example of how the +15 is very tough to fit correctly w/out adding out of spec camber & the need for some serious fender pulling
#7349
for trackday i would like to run on evo IX semislick 265/35 r18 with wheels 18X9.5 ET 22 or 38.
Will ET38 fit without problems on brake calipers and coilovers?
because i'm afraid to go ET22. i already run 235/40r18+ xxr527 18x8.75 ET20 and they touch often everywhere and 18X9.5 ET 22 will be 8mm more out...plus bigger tyres 265/35r18..
current situation on evo IX:
stock body
back fender rollered
back camber -2 ,front camber -3
bilstein pss9 (coilovers+springs) and quite low
i will appreciate lot comments
thanks
Will ET38 fit without problems on brake calipers and coilovers?
because i'm afraid to go ET22. i already run 235/40r18+ xxr527 18x8.75 ET20 and they touch often everywhere and 18X9.5 ET 22 will be 8mm more out...plus bigger tyres 265/35r18..
current situation on evo IX:
stock body
back fender rollered
back camber -2 ,front camber -3
bilstein pss9 (coilovers+springs) and quite low
i will appreciate lot comments
thanks
#7350
for trackday i would like to run on evo IX semislick 265/35 r18 with wheels 18X9.5 ET 22 or 38.
Will ET38 fit without problems on brake calipers and coilovers?
because i'm afraid to go ET22. i already run 235/40r18+ xxr527 18x8.75 ET20 and they touch often everywhere and 18X9.5 ET 22 will be 8mm more out...plus bigger tyres 265/35r18..
current situation on evo IX:
stock body
back fender rollered
back camber -2 ,front camber -3
bilstein pss9 (coilovers+springs) and quite low
i will appreciate lot comments
thanks
Will ET38 fit without problems on brake calipers and coilovers?
because i'm afraid to go ET22. i already run 235/40r18+ xxr527 18x8.75 ET20 and they touch often everywhere and 18X9.5 ET 22 will be 8mm more out...plus bigger tyres 265/35r18..
current situation on evo IX:
stock body
back fender rollered
back camber -2 ,front camber -3
bilstein pss9 (coilovers+springs) and quite low
i will appreciate lot comments
thanks