18x10 Work Varianzas... 4.5" Lips
#46
Newbie
iTrader: (2)
I know where EVO-L is coming from.
As a former regional sales rep. of a very large aftermarket MFG co. Im not getting into who i use to work for. but for certain kinds of information on design and physical dimension are considered by some companies to be VERY SECRET.. due to the problems of "Wheels being copied.
"Some "offsets", "pad depth","tensile strength of the alloys" employed in the design of the wheel, all this and a few others things dictate the "LOAD RATING" AND "WEIGHT"
AND YES MANY IN THE INDUSTRY CONSIDER THIS TO BE VERY SECRETIVE INFORMATION!!!
this is the most critical aspect. I can tell you for certain their are only 15 LAGIT! MFG plants in the world. and i have been to all of them.. 2 of them "well lets say walking into SKUNKWORKS AT LOCKHEED MARTIN would have been easier...
i actually had to get security clearance to gains access to the plants that my former company own...
here is a general breakdown of classification:
cheap cast wheels = 500-900lbs. $50-$300 pw
pressure cast = 1000-2000lbs. $200-$500pw
forged = 2500-5000lbs $300-$2000 pw
rotory forged = 2000- 100,000lbs+ $200-$10,000 pw
KINDA
As a former regional sales rep. of a very large aftermarket MFG co. Im not getting into who i use to work for. but for certain kinds of information on design and physical dimension are considered by some companies to be VERY SECRET.. due to the problems of "Wheels being copied.
"Some "offsets", "pad depth","tensile strength of the alloys" employed in the design of the wheel, all this and a few others things dictate the "LOAD RATING" AND "WEIGHT"
AND YES MANY IN THE INDUSTRY CONSIDER THIS TO BE VERY SECRETIVE INFORMATION!!!
this is the most critical aspect. I can tell you for certain their are only 15 LAGIT! MFG plants in the world. and i have been to all of them.. 2 of them "well lets say walking into SKUNKWORKS AT LOCKHEED MARTIN would have been easier...
i actually had to get security clearance to gains access to the plants that my former company own...
here is a general breakdown of classification:
cheap cast wheels = 500-900lbs. $50-$300 pw
pressure cast = 1000-2000lbs. $200-$500pw
forged = 2500-5000lbs $300-$2000 pw
rotory forged = 2000- 100,000lbs+ $200-$10,000 pw
KINDA
#47
Evolving Member
iTrader: (3)
Join Date: Jul 2005
Location: In Hell, but making my way out
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Hey, not everyone wants the same rims as every other Evo owner. Evo-L, those look good on there. I don't know what it is with so many people saying that staggered fitment doesn't work or look good on and Evo. Those look better than I thought they would and I considered going staggered as well at one point. People need to chill with the negative comments, as everyone has different taste. If you don't like them, just say so in a non-rude way. Audi's in Europe run staggered all the time. I personally think it looks SICK.
It kills me how many people are out of touch with car custom styles world wide that look good.
Peace
It kills me how many people are out of touch with car custom styles world wide that look good.
Peace
#49
Newbie
iTrader: (2)
EVO-L im thinking i might want to buy your wheels...
you say $2500 for rims and tires?
im in the tampa area i want too meet up with you to take a closer look.
toooo many NOOO MONEY B!TCHES ON HERE....
MAN , i thought a $35,000 car would get me out of the NO MONEY B!TCHES!!!!! CLUB
OH YEAH JDM VIP!!!! no doubt
you say $2500 for rims and tires?
im in the tampa area i want too meet up with you to take a closer look.
toooo many NOOO MONEY B!TCHES ON HERE....
MAN , i thought a $35,000 car would get me out of the NO MONEY B!TCHES!!!!! CLUB
OH YEAH JDM VIP!!!! no doubt
#50
Former Sponsor
Thread Starter
iTrader: (38)
Join Date: Apr 2005
Location: Orlando, FL
Posts: 1,578
Likes: 0
Received 0 Likes
on
0 Posts
EVO-L im thinking i might want to buy your wheels...
you say $2500 for rims and tires?
im in the tampa area i want too meet up with you to take a closer look.
toooo many NOOO MONEY B!TCHES ON HERE....
MAN , i thought a $35,000 car would get me out of the NO MONEY B!TCHES!!!!! CLUB
OH YEAH JDM VIP!!!! no doubt
you say $2500 for rims and tires?
im in the tampa area i want too meet up with you to take a closer look.
toooo many NOOO MONEY B!TCHES ON HERE....
MAN , i thought a $35,000 car would get me out of the NO MONEY B!TCHES!!!!! CLUB
OH YEAH JDM VIP!!!! no doubt
#51
Evolving Member
Join Date: Oct 2005
Location: The OC
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
The offset is only half the equation since the potential owners will need to know what type of disk they placed on the barrel of the wheel. I should know I have work wheels too and I got staggered 3 piece look almost 2 years ago.
Props on the choice of wheels though. They look amazing.
Props on the choice of wheels though. They look amazing.
#52
Former Sponsor
Thread Starter
iTrader: (38)
Join Date: Apr 2005
Location: Orlando, FL
Posts: 1,578
Likes: 0
Received 0 Likes
on
0 Posts
The offset is only half the equation since the potential owners will need to know what type of disk they placed on the barrel of the wheel. I should know I have work wheels too and I got staggered 3 piece look almost 2 years ago.
Props on the choice of wheels though. They look amazing.
Props on the choice of wheels though. They look amazing.
Thanks man, I have always liked you car. I looked at your car a lot while I was waiting for these. We could get more lip on yours if you would like haha, PM me
#54
Evolved Member
iTrader: (9)
1) you bought a wheel that looks like crap on your car (if your going to do a wheel that big, should have done wide body)
2) put tires on that were to small
3) realized that your "Custom staggered" setup is meant for a BMW or a Ferarri and looks extremely goofy on an AWD car... you just don't put a staggered setup on AWD cars...
I disagree
#56
Evolving Member
Join Date: Oct 2005
Location: The OC
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
#58
Evolved Member
iTrader: (9)
you are absolutely amazing man.. I am not going to contact WORK and explain to them that a buddy of mine recently had a set of these wheels made "custom for an evo" and get the offset out of them, because its not worth my time..
The funny thing is I am not interested in the wheels, and i shouldn't let this bother me... but you are acting like a kid about the stupid offsets.. You don't even want the wheels and you are willing to sell them already for what reason?
1) you bought a wheel that looks like crap on your car (if your going to do a wheel that big, should have done wide body)
2) put tires on that were to small
3) realized that your "Custom staggered" setup is meant for a BMW or a Ferarri and looks extremely goofy on an AWD car... you just don't put a staggered setup on AWD cars...
The funny thing is I am not interested in the wheels, and i shouldn't let this bother me... but you are acting like a kid about the stupid offsets.. You don't even want the wheels and you are willing to sell them already for what reason?
1) you bought a wheel that looks like crap on your car (if your going to do a wheel that big, should have done wide body)
2) put tires on that were to small
3) realized that your "Custom staggered" setup is meant for a BMW or a Ferarri and looks extremely goofy on an AWD car... you just don't put a staggered setup on AWD cars...
#59
Could we see a pic from the rear? One that shows top angle of tire and how they sit in relation to the rear quarter.
The wheels look nice..but I do agree that a 255 is too small I understand that's what's needed to even have a chance to fit them though.
BTW, I know it was asked before but I don't think it was answered. What's the weight of them?
The wheels look nice..but I do agree that a 255 is too small I understand that's what's needed to even have a chance to fit them though.
BTW, I know it was asked before but I don't think it was answered. What's the weight of them?
#60
Evolved Member
iTrader: (38)
Maybe if the Cyber EVO ran a 295/30/18 it could finally beat the TRB-02's time! !
EVOlutionary