pictures of evo (sorry, not 56k friendly at all)
#1
Newbie
Thread Starter
Join Date: Feb 2007
Location: City of Industry, CA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
pictures of evo (sorry, not 56k friendly at all)
here are some pictures found here and there and some taken by me or friends
- 2007 D1GP, Las Vegas Speedway (Koyo Radiator Booth)
- 2007 SEMA, Las Vegas Convention Center (Koyo Radiator Booth)
- 2007 Super Lap Battle, Buttonwillow CW13
we are super understeer masters, need to work more on our suspension setup,
came in 7th in limited AWD class, 1st time out to track since car was built starting June of '07, best lap time of only 2:00.030
- 2007 D1GP, Las Vegas Speedway (Koyo Radiator Booth)
- 2007 SEMA, Las Vegas Convention Center (Koyo Radiator Booth)
- 2007 Super Lap Battle, Buttonwillow CW13
we are super understeer masters, need to work more on our suspension setup,
came in 7th in limited AWD class, 1st time out to track since car was built starting June of '07, best lap time of only 2:00.030
#5
Newbie
Thread Starter
Join Date: Feb 2007
Location: City of Industry, CA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
thanks
some of it is from the apexi rx6 turbo kit, but the upper and most is XS Engineering piping, they have a kit and some where custom made for the turbo kit
thanks
some of it is from the apexi rx6 turbo kit, but the upper and most is XS Engineering piping, they have a kit and some where custom made for the turbo kit
thanks
Trending Topics
#9
Newbie
Thread Starter
Join Date: Feb 2007
Location: City of Industry, CA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
not sure if there is something else out there but the whole body kit is a APEX'i, the car is sponsored by APEX'i USA and the body kit was actually taken off their white '03 demo car and given to us, as far as i know we have 1 of 2 kits that exists, the other kit is unpainted and untouched at APEX'i USA in case they ever plan on making the kit for production, APEX'i was going to have the kit produced for sale but apparently in Japan, the company who made the original kit and has the mold went out of business and took the molds with them so they never found someone else to remake a mold because molds costs alot of money
#13
Newbie
Thread Starter
Join Date: Feb 2007
Location: City of Industry, CA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
ok cool, this must've been taken during the booth setup because it was still daylight and it was so hot in vegas, you have a link to the original? thanks
i have all the bars, the trunk one, underneath there are 3 or 4 pairs, and the front one above the intercooler, all of them fit with the hardware included and is easy and straight forward, the front one due to the bigger apex'i intercooler, i have a bang and dent it a little bit, better than not have anything in the front because i took off the front bumper crash beam, ill tak pics of everthing underneath and without the front bumper on 1 day
thanks
thanks