Originally Posted by Fireball

Found this picture among my archives, and have done some updating since, but thought this would be a good addition to this thread.



I'll take some new pictures of it when it comes out of storage in about a month.

Originally Posted by speedomodel

My five gauge console.



I should have just bought an AiM Sports MXL.

Originally Posted by speedomodel

Custom job I'm afraid -- many lonely nights spent sanding in my bathtub.

Originally Posted by speedomodel

Long ago I also made a three-gauge main console and two-gauge tranny panel.

Originally Posted by speedomodel

Originally Posted by speedomodel

Perhaps.

I took these photos over the weekend, but they don't do the panel much justice.





Any way, I haven't had the best experience with the SPA gauges. I had an empty dash for the entire summer while I waited for a couple of my gauges to get repaired. They weren't cheap to fix either since they're now out of warranty. At one point they even sent me back the wrong gauges.

BTW, notice the temperature difference in the fourth exhaust manifold runner.

Originally Posted by kmcconn9

Here is my interior with the custom gauge pod I fiberglassed a couple of days ago...

Originally Posted by krazirob

here is a close and far night shot of my NDX JVC. they have one that is the same size that has the NAVI option. Fits perfect in the evo!!!!!!!!!

Originally Posted by JK69

well...

last friday we installed four defi gauges... oil temp, oil press, boost, egt

Originally Posted by zbomb

here's mine. Defi's in their triple meter hood.

Originally Posted by XK120

Rexspeed Triple 60mm Pod (don't worry I'll hardwire the V1 soon)
Two of my gauges aren't hooked up yet...that's why they don't work

Originally Posted by BigBallin

Originally Posted by Profoxcg

gruppe-s.com they sell them / make them.


BTW here is mine:

This is still a work in progress as I can not decide wether to keep my current boost gauge (Defi Link) or replace with a Defi BF to match my current setup. (I just like the autometer pod, I wich they made it in 60mm)

Also, I need an extra gauge currently. I decided to a EGT
Before:


Now:

Originally Posted by ultimatesteve

Originally Posted by burchdc

Posted this already in the "Graphite Grey" thread. Will post some more as soon as I get the new blue-face overlays for my stock gauges to match the defis.

Originally Posted by BigBallin

Originally Posted by 4GSix3T

Here is my old setup, the new setup is going to be nice

Originally Posted by Pure EvoIX

*Update* V1 is now hardwired. Look at signature for details.

Originally Posted by MR RALLI*ART

Found this while browsing through Car Domain


Looks quite good IMO

Originally Posted by revvin9k

Originally Posted by 6-speed

Never had a chance to take pics of my new steup until now.




Thanks for looking.

Originally Posted by zbomb

Originally Posted by revvin9k

Originally Posted by eficker

Well, i just installed my Zeitronix wb and i thought it looked okay, so i'd thought i'd post it up.

Originally Posted by Evo8

Here is my interior

Originally Posted by CarbonWorks

This is Done by us at CarbonWorks.

Originally Posted by Middle Man

Latest mod courtesy of FHRX Studio's here in Sydney.....and thanks to my mate Tommo for the pic



This has been made from scratch.....not just CF over the original dash piece.

Originally Posted by raiceboi697

this is what we just finished building

Originally Posted by Evo8

Here is mine

Originally Posted by slickevo18

here's another pic!

Originally Posted by ne evo

here is a pic of my RRM CF 3 gauge dash pod, i really like it, good quality and it is at a perfect veiw angle

Originally Posted by Rexpeed

Dry Carbon dash trim

Originally Posted by ImJoey

Rexpeed dash and cluster overlays:

Originally Posted by Enyth

here is mine..

Originally Posted by kgmm

My contribution to this thread.

Originally Posted by QwikSRT4

I want to be a IX so bad, I got bored with cf vinyl.

What do you guys think? I'm still wondering about the cheap c/f look.

Originally Posted by revvin9k

Originally Posted by helli0n

Nothing too special, just happened to get kinda cool looking shots...

Originally Posted by Rexpeed

here is dry carbon in non high gloss clear coat






here is a better picture of the center piece it will look exactly like the smaller piece on the left side.

Originally Posted by cochrand

Originally Posted by krazirob

cant wait to get this piece in, been in the making for a couple weeks now.

couple days and i should have it and installed....

Originally Posted by krazirob

here is my final interior dash piece.......

Originally Posted by DRFTKNGG

Originally Posted by helli0n

Nothing too special, just happened to get kinda cool looking shots...

Originally Posted by aznj

just wanted to post up what i did on a slow day at work

Originally Posted by 90GSX-03EVO

I've come to realize that I hate when add-on electronics are out in the open.

Originally Posted by Viciouslord

heres my setup.


i want to get rid of the SAFC holder, but need to find a new panel first.

Originally Posted by mitsuEVO8kid

Headunit=Alpine IDA-X001

Originally Posted by NocturnalEVO

A shot taken by my bro

Originally Posted by edwin

heres one of mine-

Originally Posted by johnjonfenomeno

Originally Posted by Derek888

Originally Posted by razorlab

A bit dirty but it gets used.

Originally Posted by jusa4cyl

I also was able to chage the dash lights to a nice orange but coloring the clear plastic pieces inside the radio and ac controls. I will post pis as soon as i can.

Originally Posted by Peteypab2133

here is how my dash lights up at night...




more of a blue tint.... Will have better pics once i get my gauges installed to match...

Originally Posted by haziq9

here's mine no biggie....

Originally Posted by white venom

nothing fancy== 7in in-dash tv car only has 3000 miles on it and have owned it for 1 1/2 months

Originally Posted by 201Motorsports

My mods are minimal. V1, Greddy TT, and an Orbital 2-DIN kit... for now.

Originally Posted by rmhevo

Originally Posted by pinsneedles

And the orbital kit fits RHD as well!

Originally Posted by Gary 805

I suck at taking photos.

Originally Posted by [GBU]Moon

Originally Posted by Akisan2

Originally Posted by evoark

here is mine

Originally Posted by vletnguyen

here is my current setup, sorry for bad pic

Originally Posted by LilRico

Here's mines


I'll follow with some night pics later...

Originally Posted by EMR8

Originally Posted by TycoRacing702

my bride seats but none in the back

Originally Posted by JDMgrafiteMR

i thought i post pix of my interior first then dash after i get it installed...enjoy!

Originally Posted by ElectricEvoIX

some pics of my headliner and inside pillars I just finished painting

Originally Posted by XK120

Here's a "teaser" shot of my interior setup..Rexpeed pod, hardwired V1, Broadway mirror, and suede headliner

Originally Posted by Aussie_8MR

Nothing special - Stock Evo 8MR seats, suede wheel, Sabelt harness.

Originally Posted by DRAGHICI

Originally Posted by mikenjulie

Hey all,

I posted some pics awhile back when I first got the interior put in, but it was in Jan and the pics were in the flourescent lights of the garage. Here are some outdoor pics, although it appears "orangier" cause of the light. I know they aren't everyone's cup of tea, but figured I'd show something different.


https://www.evolutionm.net/forums/at...6&d=1212781341
https://www.evolutionm.net/forums/at...7&d=1212781355
https://www.evolutionm.net/forums/at...8&d=1212781365
https://www.evolutionm.net/forums/at...9&d=1212781378
Mike

Originally Posted by Phil_FQ

My interior shots









Phil

Originally Posted by M3this

Here are some of mine:

Originally Posted by rbk125

My Interior.

Originally Posted by WavMixer

got laptop and HAM radio?

Originally Posted by masterklide

here's mine..

[IMG][/IMG]

Originally Posted by dafarmer69

im sure someone wont like, but i do, and its my car...

i know i forgot to vacuum the floor..

Originally Posted by krazirob

here is my new interior thus far, just got done with it. all i need to put in is my alky/meth gauge wherever thats gonna go.....lol







will post more as i get them

Originally Posted by cpdevo31

Duplicolor Vinyl and Fabric Spray paint for all interior pieces

Black lining for the headliner

Alpine IVA-D900 headunit
w/ Navigation, XM tuner and 6-disc cd changer

Arc Audio 12" sub (Chip Foose Edition)
Arc Audio 4100 amp (Chip Foose Edition) end caps signed by Chip himself on both amps
Arc Audio 2200 amp (Chip Foose Edition)
Arc Audio Rear deck speakers (Chip Foose Edition
Arc Audio Kar Series Front door speakers and tweeters

Originally Posted by speedomodel

Yep. It's nicely shaped and weighted, and sits lower than the stock knob. It's now in my GSX -- I put a Colt Ralliart shiftknob in the Evo. I still prefer the wider diameter of the Kartboy knob, though.

Originally Posted by sscottttt

A couple of pics of a new shift boot and knob, nothing major just the first interior mods I've done. Got both off eBay for next to nothing and couldn't be happier with the results.

Originally Posted by ImJoey

Got my dream knob finally

Originally Posted by threepointsix

DEFI HUD.....never look down again under the steering wheel....except at the pesky low fuel light. Pimp factor is a on a 1-10 scale = 10 about $300 retail. RPM's at cold start for pic. It does its own 'Defi dance' upon power up/down like the ambers.

Originally Posted by bluej20

Here are Pics of My install....

The only thing i did diffrent was used to dremel to cut the original top piece in the shape of 1.5"x1.5" to route the vaccum line through without crimping issues...No wires or lines coming out from the back...

here are some pics

Originally Posted by Mitchubishi

Holy crap you had a lot of time on your hands....nice collection.