Full A-Pillar Guage Pod found!
#91
the one on EBAY used your photos...you may want to look into that.....
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2432785176
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2432785176
#92
Fireball, any chance of doing these pillars in 60mm? I've also got a 60mm Greddy gauge and was planning on using all 60s. Unfortunately also, I don't have a Dremel tool handy to sand it down... And I want this damn pillar!!!
#93
it comes pre formed for 52mm
use a regular file from a hardware store (a couple might be good, but make sure you dont use anything too rough, but not so fine that you'll be at it for hours,, finish with a very fine file)
only need to take off 4mm and you'll be good
use a regular file from a hardware store (a couple might be good, but make sure you dont use anything too rough, but not so fine that you'll be at it for hours,, finish with a very fine file)
only need to take off 4mm and you'll be good
#94
well, i got the pod, and the 52mm fits GREAT
but there is NO WAY a 60mm will fit in there (i ruind the bottom gage mount trying) there's just not enough material to work with
Sooo... Learn from my $160 dollar mistake..
DO NOT TRY AND FIT a 60mm Gage in this pod
Looks like i'll be going with the CF ones after all.. hehe
I could salvage it and cut the bottom gage thing out and make it a tweeter window.. but i want 3 gages..
if anyone else wants to try that and wands a 2 gage a pilar that fits 52mm I'll sell you mine, just make an offer
but there is NO WAY a 60mm will fit in there (i ruind the bottom gage mount trying) there's just not enough material to work with
Sooo... Learn from my $160 dollar mistake..
DO NOT TRY AND FIT a 60mm Gage in this pod
Looks like i'll be going with the CF ones after all.. hehe
I could salvage it and cut the bottom gage thing out and make it a tweeter window.. but i want 3 gages..
if anyone else wants to try that and wands a 2 gage a pilar that fits 52mm I'll sell you mine, just make an offer
#95
Originally posted by alex_alex
I think most of us EVO owners are dying for some sort of A-pillar pod.
But, compared to the cost of an Autometer mass produced pod for other cars, $120 sounds a bit high.
I understand that it is custom work, but nevertheless i think that waiting for a big company to sell them for much cheaper may be a better option for me, especially when the custom piece comes with consequences like a covered tweeter.
But post some pics and maybe ill have second thoughts.
I think most of us EVO owners are dying for some sort of A-pillar pod.
But, compared to the cost of an Autometer mass produced pod for other cars, $120 sounds a bit high.
I understand that it is custom work, but nevertheless i think that waiting for a big company to sell them for much cheaper may be a better option for me, especially when the custom piece comes with consequences like a covered tweeter.
But post some pics and maybe ill have second thoughts.
Thread
Thread Starter
Forum
Replies
Last Post
[WTB] WTB: A-Pillar Gauge Pod
six40
For Sale - Interior / Exterior / Sound / Styling
2
Apr 14, 2017 02:03 PM