EvoIXMR

iTrader: (66)

How does one remove the cheesy mesh on the Seibon stock hood and re-use the stock vent? Can I see a pic please?

Thanks!

partyboy1122

iTrader: (16)

Here you go. I used "L" shaped brackets under the hood to hold it together.

TheDream

iTrader: (7)

wow that looks good, what kind of lip do you have on it?

EvoIXMR

iTrader: (66)

Does the mesh seperate from the rubber piece? Sadly, I have no stock hood to look at since I sold mine with the mesh. I was going to get that mesh from a dealer. I do have the metal piece....

One more question - My seibon has a plate of some sort with 4 screws - can I remove it?

Pro-Spec

iTrader: (5)

I Like the Front lip too,

I would probably paint rhe SEIBON Mesh to Black and call it a day

QwikEVO

iTrader: (15)

1. put the stock mesh on top of the hood
2. put the stock vent underneath the hood (put mesh studs through the holes in the vent)
3. put a big enough washer to cover the bolt hole on the vent and secure with self-locking nut


there you go! all you have to do is sandwich that vent and mesh onto the hood scoop lip!

EvoIXMR

iTrader: (66)

Thanks man!

QwikEVO

iTrader: (15)

MEVOLV3

iTrader: (19)

^sick looking...i need 1

4drboost

iTrader: (4)

Nicely done.