RockmanX

iTrader: (78)

are you sure those rods are good? I suppose as long as your not aiming for high hp/tq your cool. the fp3065 is comparible to the fp red i think. Are you going to add arp main studs to that list one 60 or so dollars and also fluidampr?

Dannievo

im aiming for 500hp, eagle h beam should cover that hp range.... i wanted to go for I beam but they where about 700+ dollars.

this is my current mods

Shortblock:
Arias Pistons 8.6:1
Eagle H beams rods
ACL race bearings
Manley crank
block bored 0.5mm over, honed

Head:
Manley springs and retainers
Supertech performance Valves on intake and exhaust
Brian Crower 272's
ARP headstuds

Turbo:
Buschur FP3065R turbokit
Tial 44mm external wastegate

Engine ECU:
AEM EMS

PKEVO8

iTrader: (8)

patiently waiting for my bilstein hd's and swift spec-r's to get here, i hate backorder!

Shizzle

iTrader: (4)

Over the last three weeks... my box o' money spent.



All laid out.



PPI - ported, machined, tapped, coated Mani
MAperformance - Rev2 intake mani
Defi - EGT setup
BLOX - front motor mount
GSC S2 cams

Springs and retainers, Ported FP Black, FIC 850's should be here next week

MAperformance 02 dump, headstuds, Spoolin up Coils, Tial recirq valve the week after.


And... I'm broke now

RockmanX

iTrader: (78)

Welcome to the club buddy. Wait till you do a full motor build

Shizzle

iTrader: (4)

Well hoping I won't have to right away, but my motor has 70k on it... So we'll see

RockmanX

iTrader: (78)

Those Brian Crower Cams are going to hold you back hommie. May want to really consider getting a different set of cams

Dannievo

Yup i know that already, i want to change it out for GSC S2 or FP4R

850RCT9A

iTrader: (14)

I saw ur run of 10.16 at silver dollar (import showdown)..cars sounds sooo good!

stryfetew

iTrader: (10)

Got my gsc s2s siting in the box at the house waiting to go in to replace the BC 272 failz.

stryfetew

iTrader: (10)

stryfetew

iTrader: (10)

h11 HID fogs.

RockmanX

iTrader: (78)

cool long as u know that cool!!! I got fp 4prs so we shall see

Hendrixmx

iTrader: (35)

I didn't get these in the mail but I bought them off of craigslist. The exhaust is titanium.

stryfetew

iTrader: (10)

ballin. I want to change my exhaust too.. The espleir is nice and all but I want some hks g00dies.