Thailand's Cyber EVO
#23
Newbie
Thread Starter
Join Date: Dec 2008
Location: Bangkok Thailand
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
The pipes along with the exhaust manifold were made by a company called Precha Headers here in Bangkok. They build several of the race cars used in the Super Car event here in Thailand and were nice enough to made the intercool piping, header and rollcage for this car.
#25
Newbie
Thread Starter
Join Date: Dec 2008
Location: Bangkok Thailand
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
In its current set up, it puts down about 550HP becasue I still use this car as a daily driver. I'm running a Motec and recently tuend down the HP of my car to make it easier to drive on the street. To put out a large amount of HP, I would have to set the turbo to kick in at higher RPM which doesn't work well when I drive the car around the city. At the highest, it pushed about 625HP after making the car a 2.4L engine and building the rebuilding the engine ground up.
#26
Newbie
Thread Starter
Join Date: Dec 2008
Location: Bangkok Thailand
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Yes it does especially at high speeds, you can feel a major difference. The Voltex Cyber Evo bumper also comes with front under spoiler wings which makes the car run very straight on long stretches and large carnards take awhile to get use to because the faster you enter a corner the more grip the car has....which means its sometimes easier to step on the gas when entering a corner instead of tapping the brakes.....
#30
Newbie
Thread Starter
Join Date: Dec 2008
Location: Bangkok Thailand
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
I'm currently running Tein Super Racing Coilovers, I use to run Tein Monoflex, but just recently changed. The reason the car is so high, is because the streets in Thailand are not good at all and I use this car as a daily driver...even at this height, it still scraps and doesn't make it up a lot of driveways.....