My Evo IX MR with RPF1's (18x9.5 +15)
#19
Thread Starter
Evolved Member
iTrader: (15)
Joined: Jan 2006
Posts: 854
Likes: 2
From: Long Island, New York
Enkei only offers them in +15 and +27 currently. To run the +27's you need to run a 10mm front spacer. Personally i love the aggressive look and thats exactly what I wanted. I couldnt be happier
#25
Thread Starter
Evolved Member
iTrader: (15)
Joined: Jan 2006
Posts: 854
Likes: 2
From: Long Island, New York
Thats in order for the spring along with a set of JDM MR Tails.
Thank you sir!
Thanks!
yeah def a little lower then a spring setup, but not by to much. The biggest need for the coilovers for this setup though is the camber adjustment and damper. I also am running a bit of a taller tire, so yeah. I still rub a little in the rear and sometimes up front is the bumps are good enough. Nothing serious though.
Thank you sir!
Thanks!
yeah def a little lower then a spring setup, but not by to much. The biggest need for the coilovers for this setup though is the camber adjustment and damper. I also am running a bit of a taller tire, so yeah. I still rub a little in the rear and sometimes up front is the bumps are good enough. Nothing serious though.