Had a photo shoot with my car yesterday!!! White 8 with CCW's.
Nov 8, 2010 | 07:09 AM
#20
Not saying this is case here, just what I have found in my research.
OP -> the wheels look good... I am jealous
Nov 8, 2010 | 07:50 AM
#21
pics came out great.
It can be done. Just need to do a lot of rolling/pulling and trimming
Exactly.
It can be done. Just need to do a lot of rolling/pulling and trimming
looking into them myself I have found people will buy 4 of the same size so they can be rotated. The spacer is required up front to clear brakes. They could build a staggered set, but then you loose the ability to rotate.
Not saying this is case here, just what I have found in my research.
OP -> the wheels look good... I am jealous
Not saying this is case here, just what I have found in my research.
OP -> the wheels look good... I am jealous
Nov 8, 2010 | 09:42 AM
#22
Thanks guys.
And to the Grid comment over CCW..... PFFFFTTTTT HAHAHAHAHAAH uhm no! Ill take my CCW's over a rota any day. Granted i DO have a set of Rota DPT's, but they are for race tires only.
The 275s fit, but there was some rolling, cutting, massaging, etc involved. front end also has evodave fender kit.
The wheels are the same size all the way around so they can be rotated, as was stated earlier.
they are not chrome, they are polished aluminum. I was a bit weary about that blingy of a wheel, but i love it now! i have thought about anodizing the centers a different color, but dont know what i would do if i were to do it.
Thanks for the props guys!
And to the Grid comment over CCW..... PFFFFTTTTT HAHAHAHAHAAH uhm no! Ill take my CCW's over a rota any day. Granted i DO have a set of Rota DPT's, but they are for race tires only.
The 275s fit, but there was some rolling, cutting, massaging, etc involved. front end also has evodave fender kit.
The wheels are the same size all the way around so they can be rotated, as was stated earlier.
they are not chrome, they are polished aluminum. I was a bit weary about that blingy of a wheel, but i love it now! i have thought about anodizing the centers a different color, but dont know what i would do if i were to do it.
Thanks for the props guys!
Nov 8, 2010 | 09:51 AM
#23
Looks great.... I'd like to see a race/Swiss cut on an evo.... I always see the street ver.
I was goin to go with classics but the 5/8 spacers and stud kits are a must to run them.
You would think that a "custom wheel" especially an 18" at that would clear stock brakes more so than a 17
I was goin to go with classics but the 5/8 spacers and stud kits are a must to run them.
You would think that a "custom wheel" especially an 18" at that would clear stock brakes more so than a 17
Nov 8, 2010 | 10:25 AM
#26
Evolving Member
Joined: Dec 2009
Posts: 181
Likes: 0
From: pensacola
lol i would def love to get a set of these under completely stock fenders, i would love to get perfect fitment without cutting up and banging under the car,, i would love to see someone on here with PERFECT FITMENT these are the closest i've seen on an evo and i love it man, good job your car looks amazing... you have a good blend of an agressive wheel/stance and great looks... it looks very tastefull
