Official "STANCED" Evo Thread
#3541
How far off the calipers are you?
Anyone know if the varrstoen 300,s will clear in the same dimension?
#3542
Newbie
iTrader: (1)
No spacers. These wheels BARLEY cleared the front brakes. And when I said barley, I mean I painted my calipers before I put them on and it chipped a little bit of the paint off. I could run a 3mm spacer or shave my brakes a little bit but like I said, they clear fine surprisingly. I ran 1.1.1's before these with a +12 offset and those were completely fine with no spacer. It's just the fact that these new ones are so concave
#3543
Newbie
iTrader: (3)
Join Date: May 2012
Location: winchester,va
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
No spacers. These wheels BARLEY cleared the front brakes. And when I said barley, I mean I painted my calipers before I put them on and it chipped a little bit of the paint off. I could run a 3mm spacer or shave my brakes a little bit but like I said, they clear fine surprisingly. I ran 1.1.1's before these with a +12 offset and those were completely fine with no spacer. It's just the fact that these new ones are so concave
#3546
Hi guys, a brief introduction of me!
I'm from Singapore and currently driving an E9 GT. Currently the car is in the midst of prepping for the up and coming Tokyo Auto Salon that's gonna be held at Marina Bay Sands Expo on April 12,13 and 14.
I'm working for the latest automotive tuning mag, AFTMKT.
Below are the photos of my E9! Pardon for some of the crappy iphone pics.
I name my ride, Alicia. No idea why but she just gives me the Alicia feel.
1st Studio Shoot of Alicia.
alicia | Flickr - Photo Sharing! alicia | Flickr - Photo Sharing! by Ashton Ng, on Flickr
Side shot at one of our major meetup held for the very first time.
The Alliance Meet 2012
iBoost Evo | Flickr - Photo Sharing! iBoost Evo | Flickr - Photo Sharing! by Ashton Ng, on Flickr
She is a drinker.
IMG_5541 | Flickr - Photo Sharing! IMG_5541 | Flickr - Photo Sharing! by Ashton Ng, on Flickr
Basically, I sold the carbon bonnet and boot and swapped the original Advan RS for Rotas.
Wheel specs for the current Rotas is 17x9 +35? Not too sure but I fitted 15MM Spacers for the front and 15MM for the rear. It's rubbing most of the time. Tires are 255/40/17 Nexen N6000.
Camber figures aint too sure but it's definitely maxed out on my Tein HA coils.
Am thinking should I change my coils to Ohlins or G-Force? Have you guys heard of G-Force? It's made in Taiwan tho... Need some inputs!!
Do feel free to follow me on instagram, @aaashtonnn!
* why can't my photos be shown in the post? It's shown when I previewed my post! HELP ME PLEASE~
I'm from Singapore and currently driving an E9 GT. Currently the car is in the midst of prepping for the up and coming Tokyo Auto Salon that's gonna be held at Marina Bay Sands Expo on April 12,13 and 14.
I'm working for the latest automotive tuning mag, AFTMKT.
Below are the photos of my E9! Pardon for some of the crappy iphone pics.
I name my ride, Alicia. No idea why but she just gives me the Alicia feel.
1st Studio Shoot of Alicia.
alicia | Flickr - Photo Sharing! alicia | Flickr - Photo Sharing! by Ashton Ng, on Flickr
Side shot at one of our major meetup held for the very first time.
The Alliance Meet 2012
iBoost Evo | Flickr - Photo Sharing! iBoost Evo | Flickr - Photo Sharing! by Ashton Ng, on Flickr
She is a drinker.
IMG_5541 | Flickr - Photo Sharing! IMG_5541 | Flickr - Photo Sharing! by Ashton Ng, on Flickr
Basically, I sold the carbon bonnet and boot and swapped the original Advan RS for Rotas.
Wheel specs for the current Rotas is 17x9 +35? Not too sure but I fitted 15MM Spacers for the front and 15MM for the rear. It's rubbing most of the time. Tires are 255/40/17 Nexen N6000.
Camber figures aint too sure but it's definitely maxed out on my Tein HA coils.
Am thinking should I change my coils to Ohlins or G-Force? Have you guys heard of G-Force? It's made in Taiwan tho... Need some inputs!!
Do feel free to follow me on instagram, @aaashtonnn!
* why can't my photos be shown in the post? It's shown when I previewed my post! HELP ME PLEASE~
Last edited by bimbo0; Mar 30, 2013 at 11:50 AM.
#3548
Evolving Member
Join Date: Oct 2003
Location: So. Cali.
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys, a brief introduction of me!
I'm from Singapore and currently driving an E9 GT. Currently the car is in the midst of prepping for the up and coming Tokyo Auto Salon that's gonna be held at Marina Bay Sands Expo on April 12,13 and 14.
I'm working for the latest automotive tuning mag, AFTMKT.
Below are the photos of my E9! Pardon for some of the crappy iphone pics.
I name my ride, Alicia. No idea why but she just gives me the Alicia feel.
1st Studio Shoot of Alicia.
alicia | Flickr - Photo Sharing! alicia | Flickr - Photo Sharing! by Ashton Ng, on Flickr
Side shot at one of our major meetup held for the very first time.
The Alliance Meet 2012
iBoost Evo | Flickr - Photo Sharing! iBoost Evo | Flickr - Photo Sharing! by Ashton Ng, on Flickr
She is a drinker.
IMG_5541 | Flickr - Photo Sharing! IMG_5541 | Flickr - Photo Sharing! by Ashton Ng, on Flickr
Basically, I sold the carbon bonnet and boot and swapped the original Advan RS for Rotas.
Wheel specs for the current Rotas is 17x9 +35? Not too sure but I fitted 15MM Spacers for the front and 15MM for the rear. It's rubbing most of the time. Tires are 255/40/17 Nexen N6000.
Camber figures aint too sure but it's definitely maxed out on my Tein HA coils.
Am thinking should I change my coils to Ohlins or G-Force? Have you guys heard of G-Force? It's made in Taiwan tho... Need some inputs!!
Do feel free to follow me on instagram, @aaashtonnn!
* why can't my photos be shown in the post? It's shown when I previewed my post! HELP ME PLEASE~
I'm from Singapore and currently driving an E9 GT. Currently the car is in the midst of prepping for the up and coming Tokyo Auto Salon that's gonna be held at Marina Bay Sands Expo on April 12,13 and 14.
I'm working for the latest automotive tuning mag, AFTMKT.
Below are the photos of my E9! Pardon for some of the crappy iphone pics.
I name my ride, Alicia. No idea why but she just gives me the Alicia feel.
1st Studio Shoot of Alicia.
alicia | Flickr - Photo Sharing! alicia | Flickr - Photo Sharing! by Ashton Ng, on Flickr
Side shot at one of our major meetup held for the very first time.
The Alliance Meet 2012
iBoost Evo | Flickr - Photo Sharing! iBoost Evo | Flickr - Photo Sharing! by Ashton Ng, on Flickr
She is a drinker.
IMG_5541 | Flickr - Photo Sharing! IMG_5541 | Flickr - Photo Sharing! by Ashton Ng, on Flickr
Basically, I sold the carbon bonnet and boot and swapped the original Advan RS for Rotas.
Wheel specs for the current Rotas is 17x9 +35? Not too sure but I fitted 15MM Spacers for the front and 15MM for the rear. It's rubbing most of the time. Tires are 255/40/17 Nexen N6000.
Camber figures aint too sure but it's definitely maxed out on my Tein HA coils.
Am thinking should I change my coils to Ohlins or G-Force? Have you guys heard of G-Force? It's made in Taiwan tho... Need some inputs!!
Do feel free to follow me on instagram, @aaashtonnn!
* why can't my photos be shown in the post? It's shown when I previewed my post! HELP ME PLEASE~
very nice setup
#3555
Rexpeed type 1 http://rexpeed.net/2012/en/product_detail.php?serial=32