??? about rota P45R wheel fitment
#91
Originally Posted by SmokinJoe
5mm spacers in the front - rolled fenders in the rear. No clearance issues.
Go to rollyourfender.com (or something close to that) for a how-to and a special tool.
I used a heat gun and a wooden bat.
Go to rollyourfender.com (or something close to that) for a how-to and a special tool.
I used a heat gun and a wooden bat.
#100
Evolving Member
iTrader: (17)
Join Date: May 2003
Location: Alpharetta, GA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by evo150
those look so good. well worth the wait. do you have any shots showing how much the front stick out from the fender (if it does at all)?
The fronts push out from the wells - but its nearly a perfect fit. Very aggressive. Definitely a kick *** wheel.
Little close on the caliper!
#101
Evolving Member
iTrader: (17)
Join Date: May 2003
Location: Alpharetta, GA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by evobob8
Looks like a lot of neg camber Do you think your setup will go through tires fast?
Wider tires = more footprint = less camber. I used to run -2.5. I now run less than -1.5 with the same perf.