Self Alignment help
#16
Evolving Member
iTrader: (18)
Join Date: Apr 2005
Location: Reno
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
haha..yeah I also got the toe arms too.I got it cause I too am putting whiteline parts on, the roll correction kit.Adjusting the toe seems fairly easy from tire to tire but I'd like to go off a centerline on the car so its not offset side to side at 0 toe..if that makes sense.Those are decent times for the dyno at SE on 91oct.On my car, I have 3"TBE, ported/coated EX mani,hotside and ebay o2,hyperforce ignition,GSC 280/272 cams,ARC intake box,nesei LICP, tuned on 95oct.
#17
My camber plate on my Ohlins can adjust up to almost 4 degree negative. I am not sure if you are trying to get to positive camber. (But it sounds like you are) On most camber plates there are four to five holes on each side that you can insert your adjustment bolt to. You should be able to move your adjustment bolts to the inside holes and get more postive or negative camber out of them. Hope this helps.
#18
Evolved Member
iTrader: (1)
Is flipping the eccentric bolt the only means to adjust camber on a stock setup? Is it -1 or -2 and nothing in between?
Just food for thought... With newly installed Megan coilovers installed as they were setup from the factory, the eccentric bolts flipped and the car on a level surface I read -2.5 degrees on both sides. The car was leveled usind 1/8" think floor tile from Home Depot. My garage is NOT level.
Just food for thought... With newly installed Megan coilovers installed as they were setup from the factory, the eccentric bolts flipped and the car on a level surface I read -2.5 degrees on both sides. The car was leveled usind 1/8" think floor tile from Home Depot. My garage is NOT level.
#19
Newbie
Thread Starter
iTrader: (2)
Join Date: Nov 2006
Location: vallejo
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
I found a low spot in my garage, and adjusted the top bolt positions in the camber plates and went with a professional alignment to double check/correct my work. It is now perfect minus the excessive camber in the rear.
Sam
Sam
Thread
Thread Starter
Forum
Replies
Last Post
Evoguy!123
Evo Tires / Wheels / Brakes / Suspension
5
Mar 24, 2017 10:55 AM
GTWORX.com
Evo Tires / Wheels / Brakes / Suspension
83
Dec 30, 2016 05:15 PM
subrwho
Evo X Tires / Wheels / Brakes / Suspension
9
Sep 10, 2013 10:52 AM
jujukiller
Lancer Tires, Wheels, Brakes & Suspension - Sponsored by The Tire Rack
2
Sep 20, 2012 08:15 AM