Looking for opinions: DMS 40mm
#31
That's sweet. It's nice to see EVO's getting suited up for some rally action. I'd think if your going with a pretty hardcore setup the 50's are the DMS shock for you(unless your going REALLY hardcore). the 40's are much cheaper though, and very beefy. Again good luck with your build and take lots of pics...Please
#32
Evolving Member
iTrader: (21)
I have 2.5 sets of DMS 50s for my Talon, a set of Hot Bits Gravel 50s and some AGX's which have really done quite well in a pinch.
It's really too bad they won't fit the EVO.
If everything works out you should be able to catch my exploits (and those of other Mitsu Rallyers) at MitsubishiRally.com someday soon
See you out there in the dirt
RallyDSM
It's really too bad they won't fit the EVO.
If everything works out you should be able to catch my exploits (and those of other Mitsu Rallyers) at MitsubishiRally.com someday soon
See you out there in the dirt
RallyDSM
#33
I bought my car with DMS shocks I have no idea whether they are 50mm or 40mm and came with no instructions and I cant seem to find any instructions for the 40mm for the evo. I want to change the damper setting as mine seems to be on full hard. Need help in adjusting it properly. my rears have the red cap on the top of the strut instead of the bottom. Where is the adjustment to set bound/rebound?
Thread
Thread Starter
Forum
Replies
Last Post
Llew
For Sale/WTB - Engine / Drivetrain / Power
0
Jan 30, 2017 05:13 AM
LCS
For Sale - Suspension / Brakes / Handling
0
Jun 15, 2016 02:26 PM