Faust

iTrader: (28)

Hey Guys, I can't use my Cusco under braces with my sweet *** ETS 3.5" Turbo Back Exhaust. Anybody have this exhaust and still use some form of a chasis brace.

I was thinking maybe the Tanabe 4-point brace would work but I'm not sure how much lower it really is compared to the Cusco stuff. Thanks for any help anybody can provide.

ETS Michael

iTrader: (91)

Have you tried spacing the brace down a bit? It's only minimal spacing of the factory tie bars to get clearance to our 3.5" downpipe so that might be worth a shot so you could keep that sweet Cusco brace!

Tom

Faust

iTrader: (28)

Tom, maybe you should contact CBRD about this then. I was under the car when it was on the lift and it will take a hell of a lot more then minimal spacing to get the Braces to work. LMK, what you think. Thanks for any help you can provide. I love the kit and will support ETS for a very long time. Thanks again...

kreionic

iTrader: (14)

Joe I have the RMR brace. It will clear a 3.5" DP. It dips down where the DP goes. Ask Chad about mine he knows which one I have
http://store.rmrproducts.com/detail.aspx?ID=3

Faust

iTrader: (28)

Yeah Bud, I was thinking about that one. Thanks for the link. TTYS.

72Tornado

iTrader: (5)

This is the one I've got for use with my 3" Megan DP. Plenty of extra room for a 3.5"

ETS Michael

iTrader: (91)

Gotcha. I've not dealt with the Cusco brace previously, was just throwing that idea out since I didn't know how far you'd been into the process I know Chad would make it work if it were possible!

Tom

CBRD

iTrader: (60)

Tom,

I dont believe they fit, the cusco doesnt fit much lol

cb

Faust

iTrader: (28)

Your Mom doesn't fit much! Ohhh Snap!

DS-03evo

iTrader: (21)

The cusco brace only works with the stock downpipe, right?

jdm_evo8

iTrader: (28)

metal washer are dime a dozen so why not try it can't hurt to try if not i have rmr bace that i would for ur cusco one any time