the official VOLK TE37 thread...
#346
you should do it! we'll be twins haha. but on the real i wouldn't mind changing the color on these every other year. these are the exact size and offset i wanted. at first i was gonna rock spacers to push my 18x9.5, but those still aren't concave enough
#347
haha I am just going to paint my car some different color and then get some TE's in ether Orange or White because they will look good with the color I want and I agree on the 9.5 not being as concaved enough. The 10.5 just look too good tho
#355
The clearance from stut housing to the inside of the wheel will be 12mm MORE
The outside edge of the wheel will extend to THE SAME point as the stock wheel
Peep this link: http://marksink.com/tire_wheel_offset/offset.html
~Steve
The outside edge of the wheel will extend to THE SAME point as the stock wheel
Peep this link: http://marksink.com/tire_wheel_offset/offset.html
~Steve
#356
Evolved Member
iTrader: (79)
Joined: Aug 2005
Posts: 1,511
Likes: 1
From: Maryland,N.Carolina, New York
The clearance from stut housing to the inside of the wheel will be 12mm MORE
The outside edge of the wheel will extend to THE SAME point as the stock wheel
Peep this link: http://marksink.com/tire_wheel_offset/offset.html
~Steve
The outside edge of the wheel will extend to THE SAME point as the stock wheel
Peep this link: http://marksink.com/tire_wheel_offset/offset.html
~Steve
Will it fit without issues... can anyone confirm