chu

iTrader: (72)

Searched and searched to no avail. I'm looking to move up from 17x9.5 +38 to 17x10 +18 all around. Planning to run 255 tires since that's what I have available. What kind of camber settings are you guys using? I know front and rear will need spacers. My fenders are rolled already.

Thanks,
Chu

Neal@tirerack

iTrader: (25)

We have those wheels available if you're looking for a place.

madmax199

iTrader: (20)

I ran 17 X 10 +18 RPF1 but with 275s and it required fender work(lip rolled and pulled) and 2.8 degrees of camber. I would think that even on 255s the offset pushes the rim so far out that fender work and 2.5+ camber are needed to make it work.

Touge Factory

iTrader: (149)

You will need to roll + pull your fender.

Depending on what type of tires and how low your car is.... anywhere from -3 ~ -3.5 degrees of camber will allow you to clear the fenders.

C.Gonzalez

iTrader: (6)

I have searched this for myself and found some people running 17x10 +18 in front and +38 for the rear no spacers and a roll in the rear. I will be doing this soon to see if it can be done. My car isn't very low just 1 inch all around. I would be ok with 17x9.5 but i can only find 17x10 sbc rpf1 in those offsets I want.

Evokid03

iTrader: (100)

just get 17x9.5 +18 all around... will be so much better since u can rotate..


also the wheels all ahve that aggressive stance.

Thats what i run

C.Gonzalez

iTrader: (6)

Evokid03,
Your car looks real good with the +18 offset. I don't want to use spacers other wise I would go with the setup you have. What kind of fender mods do you have done?

Evokid03

iTrader: (100)

uhhh no spacers need bud

all i did is roll rear quarters n alignment

EvolNinja

iTrader: (22)

Wow, that wheel setup sounds really aggressive man. Post up some pic when done. I only have 18x8.5 and it's rubbing like crazy. Hated it. GL

C.Gonzalez

iTrader: (6)

Really well it looks like +18 all around it is. To the OP please post pics when your set up is on.

JDM Jon

x2
should look sick as hell from the back though with 10" in the rear

chu

iTrader: (72)

How much camber are you running and what size tires? I'm not looking to stretch 235s on an 10inch wheel. I'm running 17x9.5 +38 on 255s now, and it looks pretty aggressive. Could you post pics of the +18s all around?

boostedtres

iTrader: (4)

https://www.evolutionm.net/forums/ev...-sbc-pics.html

dont know how to post pics, but heres the link chu, i referenced this when i was looking for rpf1s. dont listen to these guys 10 inch wide wheel is way sweeter than 9.5

chu

iTrader: (72)

Thanks Ryan. I'm really more interested in how it fits rather than how it will look. Very interested in the amount of camber and size of your tires.

Evokid03

iTrader: (100)

dude for a 10 wide rim a 255 is way to small.. I have small sidewall stretching with a 255 on my 9.5 wheel. I guess if u wana look like a volkswagen feel free.

Im runing re01'rs 255/40/17