Tire / Wheel Fitment Questions
#1712
Evolved Member
iTrader: (21)
Volk TE37 18x9.5 +30
Volk TE37 18x9.5 +30. Will a 255/35 tire be fine? I have a close to brand new set of tires I could use if they'll work.
Looks like not many people are running the TE37's in +30 so I really couldn't find too much info.
Any help would be appreciated.
Thanks.
Looks like not many people are running the TE37's in +30 so I really couldn't find too much info.
Any help would be appreciated.
Thanks.
#1714
Evolving Member
iTrader: (2)
OK im looking to buy a new set of rims today and need to know if they will work with my swift lowering springs, of course i can get the backs rolled but will it be enough?
-18x9.5 +12
-255/35/18
-on swift springs
This is my car:
http://www.flickr.com/photos/37962377@N08/5494447787/
These are the rims on another evo but there 18x9 and his doesnt look as low:
https://www.evolutionm.net/forums/sa...rades-too.html
-18x9.5 +12
-255/35/18
-on swift springs
This is my car:
http://www.flickr.com/photos/37962377@N08/5494447787/
These are the rims on another evo but there 18x9 and his doesnt look as low:
https://www.evolutionm.net/forums/sa...rades-too.html
#1715
Evolving Member
Join Date: Mar 2010
Location: Canada
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Looking to get 18x9.5 either colk ce28n or the te37 or the advan rs all in +22 offset, just wondering if they will fit with no rubbing and im also running the DMS coilovers with white line camber plates so for height purposes i can adjust
Last edited by EV0L-IX-MR; Mar 8, 2011 at 12:08 AM.
#1717
I'm planning on buying a set of work meisters s1 that's 18 x 9.5 +12.
will it fit with pulled / rolled fenders. Im planning on putting 245/35/18 tires.
Going for the stanced look.
Thanks guise.
will it fit with pulled / rolled fenders. Im planning on putting 245/35/18 tires.
Going for the stanced look.
Thanks guise.
#1718
Evolved Member
iTrader: (72)
The rear bumper bolt will need to be moved bad, but should fit fine with the type of fender work you're planning on. I will be helping a friend fit 18x9.5 +12 Gramlights 57D in the next couple weeks. His plan is to run 245.40 all seasons. Hoping fender rolling and bumper bolt is all it needs.
#1720
Evolving Member
Join Date: Mar 2010
Location: Canada
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
As to my previous question. I found out that a dealer ship here had these in stock, so i called them up and they offered to put them on to see what bronze would look like on graphite grey. In reality i thought i was gonna look like garbage but being right there and seeing it I was more than impressed. The rims are Volk TE37 18x9.5 with a +22 offset, and the tires are 265/35/18. My car is on DMS coilovers and slammed to the ground on the stock enkei rims where they practically sit inside the wheel well so i thought i was going to have to either raise the car or roll the fenders beyond recognition. Fortunetlly once they were on and we lowered the car they fit perfectly and cleared everything. So by the looks of it I wont need fender rolling or lifting my car and my suspension is hard enough that i might be able to lower it a little more and avoid rubbing over bumps. Let me know what you guys think, still wondering what it would look like with matte black as these were the only ones they had in stock.
#1721
Evolved Member
iTrader: (20)
Join Date: Mar 2009
Location: Big city, Bright lights
Posts: 2,389
Likes: 0
Received 11 Likes
on
10 Posts
Anybody have any insight on work xd9 fitment?
I have a set of 17x8.5 +42 sitting around, but I'm thinking I will have clearance issues on the inside edge/caliper without spacers...
I have a set of 17x8.5 +42 sitting around, but I'm thinking I will have clearance issues on the inside edge/caliper without spacers...
#1722
Evolved Member
iTrader: (72)
As to my previous question. I found out that a dealer ship here had these in stock, so i called them up and they offered to put them on to see what bronze would look like on graphite grey. In reality i thought i was gonna look like garbage but being right there and seeing it I was more than impressed. The rims are Volk TE37 18x9.5 with a +22 offset, and the tires are 265/35/18. My car is on DMS coilovers and slammed to the ground on the stock enkei rims where they practically sit inside the wheel well so i thought i was going to have to either raise the car or roll the fenders beyond recognition. Fortunetlly once they were on and we lowered the car they fit perfectly and cleared everything. So by the looks of it I wont need fender rolling or lifting my car and my suspension is hard enough that i might be able to lower it a little more and avoid rubbing over bumps. Let me know what you guys think, still wondering what it would look like with matte black as these were the only ones they had in stock.
#1723
SSR Type F
Guys,
I've searched and found only 2 EvoM members running SSR Type Fs in 18x9.0 +32
Ironnically both use 245/40/18 tires, I was wondering if I can squeez in some 255s or 265s in there
Design of the spokes are somewhat similar to CE28s (Not the aggresive ones)
Will the tires hit the struts in this offset ? Planning to pick the wheels up next weekend
I've searched and found only 2 EvoM members running SSR Type Fs in 18x9.0 +32
Ironnically both use 245/40/18 tires, I was wondering if I can squeez in some 255s or 265s in there
Design of the spokes are somewhat similar to CE28s (Not the aggresive ones)
Will the tires hit the struts in this offset ? Planning to pick the wheels up next weekend
#1724
Is anyone running advan rs-d, rg-d in 18x9 et25 on a viii or ix ?
Just wondering if you had any caliper clearance issues with them being they have quite a large dish ?
Anyone have pics of the d range advan's in this size and offset on a viii or ix ?
Thanks.
Just wondering if you had any caliper clearance issues with them being they have quite a large dish ?
Anyone have pics of the d range advan's in this size and offset on a viii or ix ?
Thanks.
#1725
Evolving Member
iTrader: (2)
Join Date: Jun 2010
Location: VA
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Enkei RPF1, 17x8, 35mm offset, 5x114.3, standard 60-degree conical lug nut seat
These weigh 15.5 pounds each, and can be found for around $230 per wheel.
They fit without spacers; hub centering rings are needed, and should come with the wheels as long as you specify you want fitment for an Evo.
These weigh 15.5 pounds each, and can be found for around $230 per wheel.
They fit without spacers; hub centering rings are needed, and should come with the wheels as long as you specify you want fitment for an Evo.
so if i were to order these from tire rack, would they ship me these "hub centering rings"?