Tire / Wheel Fitment Questions
#2251
EvoM Staff Alumni
iTrader: (3)
So I am a noob when it comes to wheel fitments and setups and here are a couple of simple questions hoping someone could advise me on;
Wheels: 17 x 8.5'' 30mm offset
tires: 255-40r17
Will be running aftermarket coilovers as well.
I am looking to mount them without using any spacers. I test fitted the rim and it clears the front Brembos with no problem (with approx 1/4'' clearance).
Q1: Stock lug nuts don't seem to fit, do I need after market ones? any recommendations?
Q2: anything else I should look out for?
Thanks in advance!
Wheels: 17 x 8.5'' 30mm offset
tires: 255-40r17
Will be running aftermarket coilovers as well.
I am looking to mount them without using any spacers. I test fitted the rim and it clears the front Brembos with no problem (with approx 1/4'' clearance).
Q1: Stock lug nuts don't seem to fit, do I need after market ones? any recommendations?
Q2: anything else I should look out for?
Thanks in advance!
2. You will need a fender roll running a +30 & a 255/40 tire
Last edited by MinusPrevious; May 5, 2013 at 09:38 AM.
#2256
EvoM Staff Alumni
iTrader: (3)
Its OK to mod up the rear fenders to make these work. Its the only way to fit the wide rubber. Just make sure you have it done by an experienced person/shop. And dont let them skew your rear camber to make them fit
#2257
Hi guys,
I need to figure out what wheel i can fit for my car.
Will be mostly for track.
Looking at getting the biggest wedssport tc105n wheels i can into a evo 8 without any body work other than rolled guards! and relocate the bolt.
Hoping for 18s x9.5 and the only offsets available are +35 and +10. Preferably the +10 because of the concave design.
also looking at either 255 or 265 tire size.
Is it possible? looking at -2.5 neg camber at max.
Thanks in advance,
ak3rx
I need to figure out what wheel i can fit for my car.
Will be mostly for track.
Looking at getting the biggest wedssport tc105n wheels i can into a evo 8 without any body work other than rolled guards! and relocate the bolt.
Hoping for 18s x9.5 and the only offsets available are +35 and +10. Preferably the +10 because of the concave design.
also looking at either 255 or 265 tire size.
Is it possible? looking at -2.5 neg camber at max.
Thanks in advance,
ak3rx
Last edited by ak3rx; May 7, 2013 at 02:42 AM. Reason: Forgot tire sizing
#2258
EvoM Staff Alumni
iTrader: (3)
Hi guys,
I need to figure out what wheel i can fit for my car.
Will be mostly for track.
Looking at getting the biggest wedssport tc105n wheels i can into a evo 8 without any body work other than rolled guards! and relocate the bolt.
Hoping for 18s x9.5 and the only offsets available are +35 and +10. Preferably the +10 because of the concave design.
also looking at either 255 or 265 tire size.
Is it possible? looking at -2.5 neg camber at max.
Thanks in advance,
ak3rx
I need to figure out what wheel i can fit for my car.
Will be mostly for track.
Looking at getting the biggest wedssport tc105n wheels i can into a evo 8 without any body work other than rolled guards! and relocate the bolt.
Hoping for 18s x9.5 and the only offsets available are +35 and +10. Preferably the +10 because of the concave design.
also looking at either 255 or 265 tire size.
Is it possible? looking at -2.5 neg camber at max.
Thanks in advance,
ak3rx
Running a nice 265/35 on the +35 will require some rear fender work as you noted. You may have to add some fender pulling as well
#2260
EvoM Staff Alumni
iTrader: (3)
The tire side wall will fit more squarely on the 10" rim in which you will be losing rear fender gap. The tire will now be closer to the lower control arm
Most aggressive set-up
BTW, You really should be asking these guys here
https://www.evolutionm.net/forums/mo...25-18x10s.html
Last edited by MinusPrevious; May 10, 2013 at 09:56 AM.
#2261
Hello:
I still have stock rims on my evo and stock suspension, I am looking to get the XXR 527 on 18x9.75,will like to know if it will look ok without lowering it , which tire I will need to use and what offset.
Thanks for any info.
Edgar.
I still have stock rims on my evo and stock suspension, I am looking to get the XXR 527 on 18x9.75,will like to know if it will look ok without lowering it , which tire I will need to use and what offset.
Thanks for any info.
Edgar.
#2262
EvoM Staff Alumni
iTrader: (3)
^^^Your best bet is to hook up w/those that are discussing that specific wheel
Start here & do some additional XXR searching. There are more than a few threads
https://www.evolutionm.net/forums/ev...l-fitment.html
Start here & do some additional XXR searching. There are more than a few threads
https://www.evolutionm.net/forums/ev...l-fitment.html
#2263
Hey I have a Evo 9 on tanabe springs gf210 looking into buying some enkei nto3 in 18x9.5 +27 what will I need to do to make them work? Also what kinda of spacer do you guys use as I know you have to run some with this rim.
#2264
EvoM Staff Alumni
iTrader: (3)
Best bet is to search it out
Heres a starter thread for ya
https://www.evolutionm.net/forums/ev...t-spacers.html
Heres a starter thread for ya
https://www.evolutionm.net/forums/ev...t-spacers.html