Tire / Wheel Fitment Questions
#256
Newbie
Join Date: Mar 2004
Location: Ft. Lauderdale, Florida
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jbrown
If it's for an Evo, it should work fine.
The worst case would be a cheap 3mm spacer up front.
If it's for the Prelude in you personal info, I have no clue.
The worst case would be a cheap 3mm spacer up front.
If it's for the Prelude in you personal info, I have no clue.
im leaving the honda game and getting an evo 9 once i get back to south florida next month.
once i saw these wheels, i knew i wanted them
#259
Evolved Member
iTrader: (17)
Join Date: May 2004
Location: S. Florida
Posts: 1,581
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by projekt_shocker
18"x9" wheel with +30 offset...
will that fit?
will that fit?
What wheel?
What do the spokes look like?
Are you ok with adding a 5 or 6mm spacer if necessary? At that pont the wheel would stick out a little bit.
#260
Evolving Member
iTrader: (5)
Join Date: Jun 2004
Location: VA/KSA
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Andrew LB
I'm looking at some Volk TE37's.
Hey fellas. Will 18x9.5 ~35mm fit? Fender rolling is not an issue with me.
Hey fellas. Will 18x9.5 ~35mm fit? Fender rolling is not an issue with me.
#261
Evolving Member
iTrader: (3)
Join Date: Sep 2005
Location: sfv 818
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MR 600
+1 , I also ordered the time attacks in 18X9.5 +34 offset, Will these fit OK? will i need spacers? Tires will be (255 35 18), i also want to install a 355mm big brake kit (Brembo or Stoptech).
#262
Evolved Member
iTrader: (19)
it's a long shot, and i know it will take some work, but will a 17x9 +22 Super Advan SA3R fit with 055/40/17? i'm pretty sure the calipers are not an issue at all, but i wonder how much camber/roll/pull is necessary and if theat's even enough? Seems about 6mm too low offset than ideal. I dont mind them sticking out bit, i just don't want them rubbing. the fronts are not my concern (b/c pull, wide fenders+camber in front is easy and effective. it's whether i can work around the back fender in this size with less than 2 degrees of camber...
#263
Evolved Member
iTrader: (17)
Join Date: May 2004
Location: S. Florida
Posts: 1,581
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hokiruu
it's a long shot, and i know it will take some work, but will a 17x9 +22 Super Advan SA3R fit with 055/40/17? i'm pretty sure the calipers are not an issue at all, but i wonder how much camber/roll/pull is necessary and if theat's even enough? Seems about 6mm too low offset than ideal. I dont mind them sticking out bit, i just don't want them rubbing. the fronts are not my concern (b/c pull, wide fenders+camber in front is easy and effective. it's whether i can work around the back fender in this size with less than 2 degrees of camber...
So yours would stick out about 1/2" farther than that, so I would suspect it can be done, but you will definitely need to do some fender rolling, and your steering geometry might be a little weird.
#264
Evolved Member
iTrader: (7)
Join Date: Dec 2003
Location: Los Angeles, Manila Phils
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jbrown
Most ppl with 17x9's are running close a +35mm offset and from what I've heard, this doesn't rub at all with 255/40 tires. (I am going to order CE-28's in that exact setup for my car tomorrow)
So yours would stick out about 1/2" farther than that, so I would suspect it can be done, but you will definitely need to do some fender rolling, and your steering geometry might be a little weird.
So yours would stick out about 1/2" farther than that, so I would suspect it can be done, but you will definitely need to do some fender rolling, and your steering geometry might be a little weird.
#266
Evolved Member
iTrader: (19)
Originally Posted by BigSkyLLC
Any pics w/ 18x9.5 with out spacers, fender rolling or other mods?
#267
Newbie
Join Date: Aug 2006
Location: Knoxville, Tennessee
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Volk TE 37 17X9.5 on evo 9 mr??
hi, is it possible that Volk TE 37 17X9.5 fits on evo mr with out any wide fanders?
if it fits, what off-sets? does it gonna clear calipers? any speacers?
thank you much
if it fits, what off-sets? does it gonna clear calipers? any speacers?
thank you much
#268
Evolved Member
iTrader: (17)
Join Date: May 2004
Location: S. Florida
Posts: 1,581
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mymroadster
hi, is it possible that Volk TE 37 17X9.5 fits on evo mr with out any wide fanders?
if it fits, what off-sets? does it gonna clear calipers? any speacers?
thank you much
if it fits, what off-sets? does it gonna clear calipers? any speacers?
thank you much
#270
Evolved Member
iTrader: (17)
Join Date: May 2004
Location: S. Florida
Posts: 1,581
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kmcconn9
How about a confirmation on the FNO1-RC's in 18x9.5 and a reccomend tire size?
Probably will need to roll the fenders to stop what will likely be minimal rubbing.