Tire / Wheel Fitment Questions
#2881
What size tires do you have? I plan on buying the same wheels, and did you have to roll your fenders?
#2882
#2887
Newbie
iTrader: (4)
Join Date: Dec 2013
Location: Sioux Falls, South Dakota
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
I have a quick question about a set up that I want to order for daily driving.
Rear fenders will be rolled and possibly pulled with bolt relocate if needed, I it will be in the bodyshop after my 2.3 is done due to last summers hail storms.
lowered on fa 510s
Wheels are-XXR 536 18x9 +18 offset
will be wrapping in 255/35/18
the 536s are a bbs rs rep to clarify, my main concern is if they will clear the brembos. At a +18 offset, I do not want to sacrifice any more with spacers. don't know to much when It comes to wheel fitment on these cars, so I figured Id shoot a question to the experts before I pull the trigger on these. Thank you in advance
Rear fenders will be rolled and possibly pulled with bolt relocate if needed, I it will be in the bodyshop after my 2.3 is done due to last summers hail storms.
lowered on fa 510s
Wheels are-XXR 536 18x9 +18 offset
will be wrapping in 255/35/18
the 536s are a bbs rs rep to clarify, my main concern is if they will clear the brembos. At a +18 offset, I do not want to sacrifice any more with spacers. don't know to much when It comes to wheel fitment on these cars, so I figured Id shoot a question to the experts before I pull the trigger on these. Thank you in advance
Last edited by dyce656; Feb 24, 2015 at 09:04 PM.
#2888
EvoM Staff Alumni
iTrader: (3)
I have a quick question about a set up that I want to order for daily driving.
Rear fenders will be rolled and possibly pulled with bolt relocate if needed, I it will be in the bodyshop after my 2.3 is done due to last summers hail storms.
lowered on fa 510s
Wheels are-XXR 536 18x9 +18 offset
will be wrapping in 255/35/18
the 536s are a bbs rs rep to clarify, my main concern is if they will clear the brembos. At a +18 offset, I do not want to sacrifice any more with spacers. don't know to much when It comes to wheel fitment on these cars, so I figured Id shoot a question to the experts before I pull the trigger on these. Thank you in advance
Rear fenders will be rolled and possibly pulled with bolt relocate if needed, I it will be in the bodyshop after my 2.3 is done due to last summers hail storms.
lowered on fa 510s
Wheels are-XXR 536 18x9 +18 offset
will be wrapping in 255/35/18
the 536s are a bbs rs rep to clarify, my main concern is if they will clear the brembos. At a +18 offset, I do not want to sacrifice any more with spacers. don't know to much when It comes to wheel fitment on these cars, so I figured Id shoot a question to the experts before I pull the trigger on these. Thank you in advance
Cant help you on caliper clearance as that is totally dependent on hub & spoke design. If spacers are needed up front that will be a deal breaker for sure IMHO. Running anything lower that +18 up front is not recommended
Dont take the +18 too lightly as the rear fenders will need some serious rolling & pulling to fit correctly running in line camber settings
#2889
Newbie
iTrader: (4)
Join Date: Dec 2013
Location: Sioux Falls, South Dakota
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for the input. The previous owner of the car either ran a very large tire or incorrectly pulled the rear fenders, so they will be seeing a lot of attention at the body shop anyway, I really wish there was a way to see of these wheeled cleared the calipers before they were sitting in my living room. I will be back with more questions, you have been very helpful!
#2890
Hey guys I just have a quick question.I just got some work emotion Kiwani 18x9.5 offset 38 and I was wondering if I run them with 245/45 or 40 would I rub?. And if I dont thats great but if I do rub will cambering stop the rubbing or would I have to roll fenders. Thank you
#2891
EvoM Staff Alumni
iTrader: (3)
Hey guys I just have a quick question.I just got some work emotion Kiwani 18x9.5 offset 38 and I was wondering if I run them with 245/45 or 40 would I rub?. And if I dont thats great but if I do rub will cambering stop the rubbing or would I have to roll fenders. Thank you
You shouldnt need any rear fender rolling w/the +38. Proper tire fitment excludes the idea of adding camber. If in spec camber cant be achieved, rolling is the next option
Last edited by MinusPrevious; Feb 27, 2015 at 07:17 AM.
#2892
Forget the 45 series & use the 40 or the 35 series. 45 series is way too large in circumference on 18's. The 40's will certainly give it a meaty looks vs the 35
You shouldnt need any rear fender rolling w/the +38. Proper tire fitment excludes the idea of adding camber. If in spec camber cant be achieved, rolling is the next option
You shouldnt need any rear fender rolling w/the +38. Proper tire fitment excludes the idea of adding camber. If in spec camber cant be achieved, rolling is the next option
#2893
EvoM Guru
iTrader: (1)
18x9.5 +38 I would go with 265/35r18. Put some meat on that thing. I'm running the same setup with a +35 offset wheel and a 5mm spacer up front to clear the strut. Rear fenders rolled flat and pulled a smidge. Fits really well.
#2894
Evolving Member
iTrader: (37)
Join Date: Nov 2007
Location: Killeen,Tx
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
I was wondering if 18 x 9.5 +20mm work emotion cr ultimates will fit without spacers? My rear fenders are rolled already and my friend doesn't wanna roll the fronts unless he is sure it needs to due to the small lip. I have 255/35/18 tires.
#2895
EvoM Staff Alumni
iTrader: (3)
Front fitment will be OK w/out rolling providing the +20 clears. If these wheels need spacers, game over IMO. (dont run them at anything lower than +20)
Heres a thread that should help
https://www.evolutionm.net/forums/ev...ave-spoke.html
Last edited by MinusPrevious; Mar 9, 2015 at 12:08 PM.