Tire / Wheel Fitment Questions
#3920
Has anyone run Enkei PF01 18x9.5 +22 or+35? Apparently these are good for clearing Brakes. Can anyone confirm the +35 will clear the front? If not I'd be happy to run +22. Tyre will be a stretched 245/40/18 AD08r as I already ordered them for my previous wheels that I cracked one of them. The PF01 EVO in SBK look tasty.
#3921
Evolved Member
iTrader: (17)
Has anyone run Enkei PF01 18x9.5 +22 or+35? Apparently these are good for clearing Brakes. Can anyone confirm the +35 will clear the front? If not I'd be happy to run +22. Tyre will be a stretched 245/40/18 AD08r as I already ordered them for my previous wheels that I cracked one of them. The PF01 EVO in SBK look tasty.
The following users liked this post:
Callum Gracie (Jul 20, 2018)
#3923
EvoM Staff Alumni
iTrader: (3)
They do look nice for sure!
#3924
Those SSR's are nice looking, just note that they will be tough to fit w/the +25 offet (rear roll & pull will be needed). Depending on tire size, the rear bumper bolt may need to be relocated. Also, the front may not fit over the Brembos w/out a spacer. (few wheels fit w/out a front spacer)
They do look nice for sure!
They do look nice for sure!
#3926
Evolving Member
#3927
Evolving Member
Haha level the sled. I was going to drop it maybe a half inch all around see where that leaves me. Haha I'm scared to roll the rears if the paint might crack
#3929
Evolving Member
iTrader: (20)
Need advice on fitment, Right now I currently use a Hoosier QTP 26x9.5x16 with 22mm spacer in the front and 20mm spacer in the rear to clear my brembos, I'm running a 16x7 Slipstream. I'm thinking on getting the 255x50x16 Hoosier Drag Radial but I'm worried if it will rub, my rears are rolled but not the front, with my current setup I have never rubbed, thanks in advance for your help.
#3930
EvoM Staff Alumni
iTrader: (3)
Need advice on fitment, Right now I currently use a Hoosier QTP 26x9.5x16 with 22mm spacer in the front and 20mm spacer in the rear to clear my brembos, I'm running a 16x7 Slipstream. I'm thinking on getting the 255x50x16 Hoosier Drag Radial but I'm worried if it will rub, my rears are rolled but not the front, with my current setup I have never rubbed, thanks in advance for your help.
Just need to know what the offset is on the 16x7 Slipstreams?