xxr 531 fitment update
#32
531S. 275,35 18X8.5 20 OFFSET. FENDER TRIM ON THE REAR. ADJUSTABLE COILOVERS. NO SPACERS ON THE BACK. SHOULD HAVE GONE WITH 255 OR 265. THESE 275S RUB
Last edited by jrmav32; May 7, 2014 at 01:37 PM. Reason: licence plate comes out
#33
Red Evo is 18x9.5 +20. I believe there may have been a spacer somewhere though don't think it was necessary but I don't remember and can't find the info, sorry. No spacer on rear
Hope this helped![/QUOTE]
The wheels on the red evo are the exact size that i can put on my car without modding much or putting any big spacers or anything correct? im about to buy these wheels for my TB EVO 9
Hope this helped![/QUOTE]
The wheels on the red evo are the exact size that i can put on my car without modding much or putting any big spacers or anything correct? im about to buy these wheels for my TB EVO 9
#34
very nice... thanks for this
#35
#36
Sorry I hate to bring up an old thread but can somebody tell me the brand of lug nuts they're running with these? I bought a set of these wheels and my Blox lug nuts do not fit, the holes on the wheela are extremely small and every tuner lugnut I find when searching is too wide around the base to fit, any helps appreciated!
#38
awesome! thanks for getting back to me i ended up going with this sickspeed set
http://www.ebay.com/itm/371194560719?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
they dont have the bulge at the bottom and measure 20mm at the base which if I measured right should fit perfect. i almost ordered a pair of muteki sr48's but there was no description of how wide the base with the bulge was so I feel a lot safer ordering these haha
http://www.ebay.com/itm/371194560719?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
they dont have the bulge at the bottom and measure 20mm at the base which if I measured right should fit perfect. i almost ordered a pair of muteki sr48's but there was no description of how wide the base with the bulge was so I feel a lot safer ordering these haha
#39
Is there a consensus as to which offset, 20mm, or 35mm to run with the 18×9.5 XXR rims? I am probably gonna want to run 265/35 Michelins on MR Bilsteins with GTWorx springs. Will I need the 25mm spacer up front with either offset?
Edit: I think that I will go with the +20 offset and that way hopefully be able to run the same rims on both my Evo X, and the VIII.
Edit: I think that I will go with the +20 offset and that way hopefully be able to run the same rims on both my Evo X, and the VIII.
Last edited by sparky; Feb 24, 2015 at 10:54 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Bmurray
Evo Tires / Wheels / Brakes / Suspension
2
Oct 16, 2017 05:02 AM
Wapoosh
Evo Tires / Wheels / Brakes / Suspension
3
Jul 6, 2017 03:13 PM
poonpower
Evo Tires / Wheels / Brakes / Suspension
7
Oct 22, 2016 06:35 PM
CodyJamesBitxh
Evo X Tires / Wheels / Brakes / Suspension
4
Mar 8, 2016 06:02 PM