Official HKS coilover review thread
#18
Evolved Member
Thread Starter
iTrader: (7)
Join Date: Mar 2004
Location: Virginia
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Karash
That rear camber seems excessive, especially if you want to rotate the car easier. The front is fine, but I would just try a 0 camber in the back and see how your front bites then. Also, are you running Yoko's?
Great write up!
Great write up!
You think I should go with less camber in the rear...it wall cuase more oversteer?
#19
can i install hypermax II to my evo III coz my brother in japan send me 1, its from Up-Garage, they specificaly said it will fit evoII-VII
Last edited by ADVAN; Oct 23, 2004 at 03:04 AM.
#20
Evolved Member
Join Date: Aug 2003
Location: Columbia, SC
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
My Hipermax II's finally came in today! It could be a few days before I have them installed, but wow, it took awhile, but they seem to be really nice... too bad all the instructions are in japanese... hopefully the guy i take it to will already pretty much know what to do. I will post my review in this same thread when I finally get them on the car!
#21
toe out in front gives good initial turn in but tends to push at the end of the turn(plus make s the car twitchy.)...less toe out or a little toe in gives less turn in but you get steering back in the end of the turn although that would make the car wander a bit on the straights.
#23
I have the hypermax 2. They are very easy to install, took me all of 1.5 hours with the proper tools. Here's a couple of pics.
Ok, this picture has nothing to do with suspension, just wanted to showoff my new fmic, lol.
Ok, this picture has nothing to do with suspension, just wanted to showoff my new fmic, lol.
Last edited by bigyellowevo; Nov 3, 2004 at 03:00 PM.
#24
Evolved Member
Join Date: Aug 2003
Location: Columbia, SC
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
ok guys, I need some help... I'm getting the Hipermax II's installed on Wednesday. My question is where should I set the ride height... I want it as close to stock height as possible because I don't want to scratch and scuff up my front bumper. Is it ok to set them up to full height in the front and back? If I do set them up that high, it won't be higher than stock right, or will it?
#29
when setting the damping on the hipermax, do you guys click max to stiff and reduce from there? i was told if you click max to soft, you run the risk of the damping rod or something going out of place?
Thread
Thread Starter
Forum
Replies
Last Post
DSG Performance
EvoX 'For Sale' Suspension / Brakes / Handling
11
Nov 27, 2015 09:28 AM
jimm
Evo X Tires / Wheels / Brakes / Suspension
9
Aug 21, 2015 08:32 AM
silverIXMR
Evo Tires / Wheels / Brakes / Suspension
15
Jun 7, 2010 09:02 PM
DrivenConcepts
Evo 'For Sale' Suspension / Brakes / Handling
47
Aug 7, 2006 08:30 PM
Vivid Racing
Evo 'For Sale' Suspension / Brakes / Handling
4
May 13, 2005 09:45 AM