Opening GB! AGP/TKMS Motor Mount & Catch Can!
#1
Evolving Member
Thread Starter
iTrader: (32)
Join Date: Jun 2006
Location: 706-288-9203
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Opening GB! AGP/TKMS Motor Mount & Catch Can!
Here as fresh vendors, we bring goods to the table
TK Motorsports Exclusive Motor Mount for Evo 8/9 by AGP Turbo
Completely replace your factory front lower roll stop on your Evolution VIII and IX with our solid mount. The frame is constructed with CNC precision and tig welded for superior strength. We have selected bushings perfectly matched to allow reduced engine movement without causing extreme vibration which is common in other mounts on the market today.
Help eliminate your engine movement with one of these mounts and cut down on wheel hop as well as firm up your shifting when banging gears. This is a complete replacement for the front engine mount, and NOT just a pressed insert. For a long lasting finish the body is powdercoated in black.
Regular Sale Price is $85 + Shipping, but we are offering a Evom GB Price of $75 SHIPPED! We have 40 of these in stock ready to ship, so when you put your name on the list and pay, we will ship it out the next day, NO WAITING!
TK Motorsports Exclusive Functional Catch Can by AGP Turbo
The Evo being a high horsepower turbocharged car runs a significant amount of piston-to-wall clearance. The cylinder pressure from the forced air creates more heat in turbocharged applications when compared to non-turbocharged engines, thus Mitsubishi designed a "loose" engine for added safety and longevity purposes. Unfortunately, a byproduct of an engine that allows a lot of blow-by is oil residue makes its way past the PCV system and ends up in the intake manifold, and many other places.
Oil residue in the combustion chamber of an engine is bad news, and can lead to really bad news with respect to how your engine runs. We have been testing a real solution for a while now that will actually separate the oil from the air flowing between the PCV and intake manifold. It sounds easy enough, as many people have tried to adapt simple catch cans and industrial water valves to remove the oil from the air. Those products do work OK but only separate a small amount with respect to how much oil is actually passing through the system. Enter the AGP Oil Accumulator.
Our three chamber oil separator gathers the airborn oil particles through the middle chamber. Oil is separated from the air through the filtering media and drains through a perferated aluminum plate on the bottom side of the middle chamber then accumulating in the bottom chamber. As this oil gets filtered through the middle chamber, clean air is then filtered again and exits through the top chamber. This three chamber system design provides the best protection against unwanted oil making its way to the combustion process.
The bottom of the Oil Accumulator has a threaded 1/4" NPT bung and a plug to allow the user an easy way to drain the oil.
The Oil Accumulator is completely constructed of aluminum and is highly polished to provide some extra 'bling' to your engine bay. This will fit the Evo perfectly and comes with hose and hose clamps for an easy installation.
Regular Sale Price is $90 + Shipping, but we are offering a Evom GB Price of SOLD OUT! SOLD OUT!
We accept VISA/MC over phone, paypal to sales@tkmotorsports.com, or mail in personal check, money order, cashiers check made out to TK Motorsports. PM me for mailing address!
TK Motorsports Exclusive Motor Mount for Evo 8/9 by AGP Turbo
Completely replace your factory front lower roll stop on your Evolution VIII and IX with our solid mount. The frame is constructed with CNC precision and tig welded for superior strength. We have selected bushings perfectly matched to allow reduced engine movement without causing extreme vibration which is common in other mounts on the market today.
Help eliminate your engine movement with one of these mounts and cut down on wheel hop as well as firm up your shifting when banging gears. This is a complete replacement for the front engine mount, and NOT just a pressed insert. For a long lasting finish the body is powdercoated in black.
Regular Sale Price is $85 + Shipping, but we are offering a Evom GB Price of $75 SHIPPED! We have 40 of these in stock ready to ship, so when you put your name on the list and pay, we will ship it out the next day, NO WAITING!
TK Motorsports Exclusive Functional Catch Can by AGP Turbo
The Evo being a high horsepower turbocharged car runs a significant amount of piston-to-wall clearance. The cylinder pressure from the forced air creates more heat in turbocharged applications when compared to non-turbocharged engines, thus Mitsubishi designed a "loose" engine for added safety and longevity purposes. Unfortunately, a byproduct of an engine that allows a lot of blow-by is oil residue makes its way past the PCV system and ends up in the intake manifold, and many other places.
Oil residue in the combustion chamber of an engine is bad news, and can lead to really bad news with respect to how your engine runs. We have been testing a real solution for a while now that will actually separate the oil from the air flowing between the PCV and intake manifold. It sounds easy enough, as many people have tried to adapt simple catch cans and industrial water valves to remove the oil from the air. Those products do work OK but only separate a small amount with respect to how much oil is actually passing through the system. Enter the AGP Oil Accumulator.
Our three chamber oil separator gathers the airborn oil particles through the middle chamber. Oil is separated from the air through the filtering media and drains through a perferated aluminum plate on the bottom side of the middle chamber then accumulating in the bottom chamber. As this oil gets filtered through the middle chamber, clean air is then filtered again and exits through the top chamber. This three chamber system design provides the best protection against unwanted oil making its way to the combustion process.
The bottom of the Oil Accumulator has a threaded 1/4" NPT bung and a plug to allow the user an easy way to drain the oil.
The Oil Accumulator is completely constructed of aluminum and is highly polished to provide some extra 'bling' to your engine bay. This will fit the Evo perfectly and comes with hose and hose clamps for an easy installation.
Regular Sale Price is $90 + Shipping, but we are offering a Evom GB Price of SOLD OUT! SOLD OUT!
We accept VISA/MC over phone, paypal to sales@tkmotorsports.com, or mail in personal check, money order, cashiers check made out to TK Motorsports. PM me for mailing address!
Last edited by TKMotorsports; Nov 21, 2006 at 11:13 AM.
#2
Evolving Member
Thread Starter
iTrader: (32)
Join Date: Jun 2006
Location: 706-288-9203
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Bump!
These take less than 20 minutes each to install. Tell a difference with the motor mount, when launching and banging thru the gears!
$75 SHIPPED - motor mount
$82 SHIPPED - catch can
$152 SHIPPED - for both (save additional $5)
These take less than 20 minutes each to install. Tell a difference with the motor mount, when launching and banging thru the gears!
$75 SHIPPED - motor mount
$82 SHIPPED - catch can
$152 SHIPPED - for both (save additional $5)
#4
Evolving Member
Thread Starter
iTrader: (32)
Join Date: Jun 2006
Location: 706-288-9203
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ultimate CC
love agp stuff, great in the srt4 world...
Trending Topics
#8
Evolving Member
Thread Starter
iTrader: (32)
Join Date: Jun 2006
Location: 706-288-9203
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by srt2evo9
nice ive been talkin to John about drivin up there and pickin up the race FMIC.... Might do these first
#10
Evolving Member
Thread Starter
iTrader: (32)
Join Date: Jun 2006
Location: 706-288-9203
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by clarkkent06
Hey TK where does the catch can mount at?
#14
Evolving Member
Thread Starter
iTrader: (32)
Join Date: Jun 2006
Location: 706-288-9203
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by XK120
how easy is it to do that motor mount? ie what is involved in the install? thanks!