Tuned Again @ Reese Tuning!
#1
Newbie
Thread Starter
Tuned Again @ Reese Tuning!
With new parts added, my X is getting closer and closer.... to needing more mods lol
Here is my current setup:
Apexi RS Evo Catback
Perrin DP w/HFC
Forge Wastegate Actuator
ETS 3.5" IC
ETS LICP
ETS UICP
AMS Intake
AEM Tru Boost MBC
My car has been tuned twice now, both from Reese. My second tune was today, since I added the IC, piping, wastegate, and MBC. James tuned it using my Cobb AP and threw a few maps on it for me.
This is what my car did on the Mustang Dyno:
The final dyno was 293/285, the image attached pretty much says it all.
(updated)**So I was running a spike of 23.5 psi. Only holding 18psi at redline. The solenoid was hot and not holding boost in the Mustang Dyno Graph, that's why it's a little choppy. The MD read est 15-18% lower than other dyno's. I'm running around 340-350awhp, my guess.**
I'm very happy with the numbers, the ride, and that James took the extra time and effort to tune it with my Cobb AP. The car gets stronger and stronger as the mods increase, but I give all the credit to Reese Tuning.
Thanks!
Here is my current setup:
Apexi RS Evo Catback
Perrin DP w/HFC
Forge Wastegate Actuator
ETS 3.5" IC
ETS LICP
ETS UICP
AMS Intake
AEM Tru Boost MBC
My car has been tuned twice now, both from Reese. My second tune was today, since I added the IC, piping, wastegate, and MBC. James tuned it using my Cobb AP and threw a few maps on it for me.
This is what my car did on the Mustang Dyno:
The final dyno was 293/285, the image attached pretty much says it all.
(updated)**So I was running a spike of 23.5 psi. Only holding 18psi at redline. The solenoid was hot and not holding boost in the Mustang Dyno Graph, that's why it's a little choppy. The MD read est 15-18% lower than other dyno's. I'm running around 340-350awhp, my guess.**
I'm very happy with the numbers, the ride, and that James took the extra time and effort to tune it with my Cobb AP. The car gets stronger and stronger as the mods increase, but I give all the credit to Reese Tuning.
Thanks!
Last edited by Evolved X; Jul 31, 2009 at 12:25 PM.
#5
Newbie
Thread Starter
So yesterday I was running a spike of 23.5 psi. Only holding 18psi at redline. The solenoid was hot and not holding boost in the Mustang Dyno Graph, that's why it's a little choppy. The MD read est 15-18% lower than other dyno's. I'm running around 340-350awhp, my guess.
Here was my last tune, my first one (May 7th 2009), which was on a Dyno Jet:
Red Line is with Exhaust and Intake only and on the Cobb AP stage 1
Blue Line is with Exhaust and Intake only with custom Reese Tune
Here was my last tune, my first one (May 7th 2009), which was on a Dyno Jet:
Red Line is with Exhaust and Intake only and on the Cobb AP stage 1
Blue Line is with Exhaust and Intake only with custom Reese Tune
Last edited by Evolved X; Jul 31, 2009 at 12:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
scotty225
Evo Dyno Tuning / Results
22
Feb 8, 2012 01:07 AM
OneCrzyEvo21
Evo Dyno Tuning / Results
61
Jan 26, 2011 10:14 PM