FP RED + E85 = 500WHP tuned by JMS
#18
Evolving Member
Thread Starter
iTrader: (3)
Join Date: Aug 2008
Location: San Antonio, TX
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
jic flt-tar coilovers dont know how much im lowered though. I just asked jms to lower it half an inch more today ill take a pic if you want and ask him what are the lowering specs are.
Cheers!!
ti-c FTW!!!
Cheers!!
ti-c FTW!!!
#19
EvoM Guru
iTrader: (50)
interesting idcs. according to cobb ap logs, we're hitting low 80s at 8000 rpm on dw1300s with pump gas in 3dman1's evo. He's currently at 450 whp DJ. The high IDCs are in part due to revving out to 8000+ rpm. I'm at 410 whp DJ, and with my FIC1100s and E85, IDCs are peaking at 75% on my Evo 9. What scaling are you using for the FIC1100s for E85?
#20
Evolved Member
iTrader: (23)
Join Date: Feb 2007
Location: San Antonio, Tx
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
interesting idcs. according to cobb ap logs, we're hitting low 80s at 8000 rpm on dw1300s with pump gas in 3dman1's evo. He's currently at 450 whp DJ. The high IDCs are in part due to revving out to 8000+ rpm. I'm at 410 whp DJ, and with my FIC1100s and E85, IDCs are peaking at 75% on my Evo 9. What scaling are you using for the FIC1100s for E85?
I'm using 696 for my injector scaling on this particular application.
#21
EvoM Guru
iTrader: (50)
If 696 cc/min scales FIC1100s with E85, then they would scale out to about 1000 cc/min on pump gas, and 3dman1's DW1300s are scaled out to 1044 on pump gas, so it looks like these injectors actually flow quite similarly.
There's a bit of decrepancy in that you're only seeing ~90% IDC on E85 at 500 whp in EvoScan where I expect the DW1300s would be close to 100% for E85 on the Cobb at very close to 500 whp. Could be a difference in scaling factor between Cobb and EvoScan for the IPW calc. Overall, interesting info.
#22