Another 400whp BBX lite- ;)
Apr 15, 2011 | 09:47 AM
#1
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 4
From: york, pa 17402
Another 400whp BBX lite- ;)
Here is another BBX Lite
CBRD Manifold
CBRD FMIC
CBRD Ic pipes (2.5 hot, 2.75" Cold)
Cobb intake
AMS Downpipe, test pipe, and UR catback
ID 1000 (the only injectors we will use now on the X, we have had MANY issues with the DW's)
3 port Pierburg
stock plugs etc.
Only revving to 7300 rpm, uncorrected was 401/343 at 25.5 psi..
Nice powerband, if I felt confident the rods would stay in it lol, Id rev to 8000 rpm and im sure it would pick up another 30whp!
Tuning another BBX today- ill try to get that posted also!
Cheers
CB
CBRD Manifold
CBRD FMIC
CBRD Ic pipes (2.5 hot, 2.75" Cold)
Cobb intake
AMS Downpipe, test pipe, and UR catback
ID 1000 (the only injectors we will use now on the X, we have had MANY issues with the DW's)
3 port Pierburg
stock plugs etc.
Only revving to 7300 rpm, uncorrected was 401/343 at 25.5 psi..
Nice powerband, if I felt confident the rods would stay in it lol, Id rev to 8000 rpm and im sure it would pick up another 30whp!
Tuning another BBX today- ill try to get that posted also!
Cheers
CB
Apr 15, 2011 | 11:58 AM
#6
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 4
From: york, pa 17402
we made 458whp on stock block stock cams, at 10.4 AFR lol,
i was afraid to hurt the stock block,
Buschurs old shop car now has our 33R tial kit on it, and at 26ish psi it is outflowing the 3"maf housing and injectors, so we will see what it makes on that!
We can definetly help! let me know, we also have an 86mm option now
cb
Trending Topics
Apr 15, 2011 | 01:58 PM
#12
Awesome results Chad, can't wait to see what the big brother does!
- Jason
- Jason
__________________
"Let us help you build your JDM dream!"
www.bulletproofautomotive.com
The Real JDM - Interactive (blog)
Email: sales@bulletproofautomotive.com
Direct North American Dealers for Voltex, Mines, Varis, First Molding, HKS Kansai, Cusco, HKS, Advan, Volk, Ings+1, C-West, Work, and so much more...
"Let us help you build your JDM dream!"
www.bulletproofautomotive.com
The Real JDM - Interactive (blog)
Email: sales@bulletproofautomotive.com
Direct North American Dealers for Voltex, Mines, Varis, First Molding, HKS Kansai, Cusco, HKS, Advan, Volk, Ings+1, C-West, Work, and so much more...
Apr 15, 2011 | 09:48 PM
#14
Hi Chad, I plan to install the "big brother" next week. Thanks for that.
For the Lite / Full... do you tune to 25psi typically? Will these turbos benefit from higher boost, say, 27/28 psi?
Will see what kinda results Gunzo can get from it... haha
For the Lite / Full... do you tune to 25psi typically? Will these turbos benefit from higher boost, say, 27/28 psi?
Will see what kinda results Gunzo can get from it... haha
