EnglishRacing Drag X 1199whp 8385 Gen 2 59psi
#31
The EGT is really high on a stock port 4B11, the intake isnt the issue as it will flow more than a 4G63. The 29mm exhaust valve and port that is 2/3s the size elevates EGT by 250* on average. It flows by virtue of force but bottlenecks create problems. The main thing we get when we port them is reduced backpressure and EGT. There is definitely power in porting the exhaust as well though, we have found 60whp overall.
#32
EvoM Guru
iTrader: (1)
The EGT is really high on a stock port 4B11, the intake isnt the issue as it will flow more than a 4G63. The 29mm exhaust valve and port that is 2/3s the size elevates EGT by 250* on average. It flows by virtue of force but bottlenecks create problems. The main thing we get when we port them is reduced backpressure and EGT. There is definitely power in porting the exhaust as well though, we have found 60whp overall.
#33
The other thing to keep in mind is it made 4whp more than a full port 4g63 with a turbo that is 11mm bigger. This car should have made over 1300 with a ported head and the 8385. 7285 to 7285, Drag X vs Drag 8 the stock head is down around 100whp, different motors to be sure but it shows where the stock head is really at in comparison.
The following users liked this post:
black E (Feb 16, 2017)
#34
EvoM Guru
iTrader: (8)
The EGT is really high on a stock port 4B11, the intake isnt the issue as it will flow more than a 4G63. The 29mm exhaust valve and port that is 2/3s the size elevates EGT by 250* on average. It flows by virtue of force but bottlenecks create problems. The main thing we get when we port them is reduced backpressure and EGT. There is definitely power in porting the exhaust as well though, we have found 60whp overall.
#37
When we have the M150 in it and 8 injectors on methanol. It will get to real boost and timing then.
M150 has a base calibration at this point based on my X, most of the CAN sniffing has been done, etc. We have to build a new harness and then wire the extra 4 injectors. It is coming soon though
M150 has a base calibration at this point based on my X, most of the CAN sniffing has been done, etc. We have to build a new harness and then wire the extra 4 injectors. It is coming soon though
#39
1/2 mile and some drag racing.
Dyno video and walk around at PRI
http://www.revvedmag.com/videos/on-t...x-at-pri-2016/
Some faster passes at the track, drag racing.
http://www.dailymotion.com/video/x4cvsz0
I will look for more.
Dyno video and walk around at PRI
http://www.revvedmag.com/videos/on-t...x-at-pri-2016/
Some faster passes at the track, drag racing.
http://www.dailymotion.com/video/x4cvsz0
I will look for more.
Last edited by JohnBradley; Mar 10, 2017 at 10:37 AM.
#40
Evolved Member
Nice work! You guys R top notch! What a/r do run on a turbo that large? Just curious 500hp @ 6500 seems like it's not as much lag as you would expect from a turbo that large.
Last edited by 2winscroll; Mar 12, 2017 at 07:40 AM.
The following users liked this post:
JohnBradley (Mar 27, 2017)
The following users liked this post:
JohnBradley (Mar 27, 2017)
The following users liked this post:
JohnBradley (Mar 27, 2017)
Thread
Thread Starter
Forum
Replies
Last Post
JohnBradley
Evo Dyno Tuning / Results
13
Oct 9, 2017 05:29 PM
JohnBradley
Evo X Dyno Results
75
Sep 28, 2015 01:01 PM
EVO8LTW
Mid-Atlantic Region
15
Feb 26, 2008 05:34 AM
EVO8LTW
Mid-Atlantic Region
2
Feb 17, 2008 12:31 PM
DynoFlash
Evo 'For Sale' External Engine / Power
34
Mar 14, 2005 08:52 PM