EnglishRacing Drag X 1199whp 8385 Gen 2 59psi
#1
EnglishRacing Drag X 1199whp 8385 Gen 2 59psi
Been meaning to post the dyno sheet of the Drag X for awhile but finally got a day I can sit down and do some forum posting. The X has gone thru many changes over the season and even managed to reset the record to an 8.56 at WCF (Import vs Domestic) in Maryland this past November. Unfortunately on that pass one of the couplers gave up the ghost around the 1100 ft mark so the both the e.t. and mph suffered since it wasnt a full 64psi pass. Trap dropped to 158 vs the 8.59 being consistent above 172mph.
Car-
EnglishRacing Aluminum rod 2.0L
GRP aluminum rods
Stock Crank
Wiseco Top fuel pistons
Magnus sheetmetal intake manifold
Stock port head (yes you read that correctly)
GSC S3 camshafts
GSC springs/valves
Fuel Injector Clinic 2150s
EnglishRacing mechanical fuel pump bracket
Aeromotive red mechanical pump
M880 Motec
GRAF 5 speed dogbox
Competition Clutch triple disc kit
E80 (80% E98, 20% C16)
ETS custom sidewinder turbo kit
ETS 6" FMIC and custom piping
Magnus DBW TB
Between low timing and spinning on the dyno, the graph isnt as smooth as I'd like to see but the results at 59psi speak for themselves -
Mods for the coming year will include an M150 Motec so we can switch to x8 injectors and methanol like the rest of our drag cars.
Uncorrected for those that will inevitably ask -
Pix from 2016
Still the highest power, quickest, and fastest Evo X in the world. Hoping to see more drag built X's in 2017
Aaron
Car-
EnglishRacing Aluminum rod 2.0L
GRP aluminum rods
Stock Crank
Wiseco Top fuel pistons
Magnus sheetmetal intake manifold
Stock port head (yes you read that correctly)
GSC S3 camshafts
GSC springs/valves
Fuel Injector Clinic 2150s
EnglishRacing mechanical fuel pump bracket
Aeromotive red mechanical pump
M880 Motec
GRAF 5 speed dogbox
Competition Clutch triple disc kit
E80 (80% E98, 20% C16)
ETS custom sidewinder turbo kit
ETS 6" FMIC and custom piping
Magnus DBW TB
Between low timing and spinning on the dyno, the graph isnt as smooth as I'd like to see but the results at 59psi speak for themselves -
Mods for the coming year will include an M150 Motec so we can switch to x8 injectors and methanol like the rest of our drag cars.
Uncorrected for those that will inevitably ask -
Pix from 2016
Still the highest power, quickest, and fastest Evo X in the world. Hoping to see more drag built X's in 2017
Aaron
Last edited by JohnBradley; Dec 7, 2016 at 02:07 PM.
The following users liked this post:
Andrew Ferrer (Feb 1, 2017)
#6
Golden Eagle sleeved block. Non O-ringed. We built it like a Honda and it worked very well.
Your user name is fine, if we had gone to 59psi on the Drag 8 vs the Drag X it would have made more with an 11mm smaller turbo. As it was that car took the record away from the Drag X by 6+ mph so the 4G63 is still the king in my mind. It does however have some strong back up in the X as the next motor in line.
Your user name is fine, if we had gone to 59psi on the Drag 8 vs the Drag X it would have made more with an 11mm smaller turbo. As it was that car took the record away from the Drag X by 6+ mph so the 4G63 is still the king in my mind. It does however have some strong back up in the X as the next motor in line.
#7
Evolved Member
Golden Eagle sleeved block. Non O-ringed. We built it like a Honda and it worked very well.
Your user name is fine, if we had gone to 59psi on the Drag 8 vs the Drag X it would have made more with an 11mm smaller turbo. As it was that car took the record away from the Drag X by 6+ mph so the 4G63 is still the king in my mind. It does however have some strong back up in the X as the next motor in line.
Your user name is fine, if we had gone to 59psi on the Drag 8 vs the Drag X it would have made more with an 11mm smaller turbo. As it was that car took the record away from the Drag X by 6+ mph so the 4G63 is still the king in my mind. It does however have some strong back up in the X as the next motor in line.
Bigger turbo? More stroke? Less boost? More bore?
Trending Topics
#10
Newbie
ive bin doing research on the magnus sheet metal manifold over other options like the SSP intake manifold. they say you need to remove or relocate the power steering to get this to fix. how do you work around that? looking for an all around car so keeping power steering is mandatory but damn that thing is beautiful.
#12
ive bin doing research on the magnus sheet metal manifold over other options like the SSP intake manifold. they say you need to remove or relocate the power steering to get this to fix. how do you work around that? looking for an all around car so keeping power steering is mandatory but damn that thing is beautiful.
Last edited by JohnBradley; Dec 13, 2016 at 01:04 PM.
The following users liked this post:
theblackbeast11 (Dec 6, 2016)
#15
EvoM Guru
iTrader: (1)
Such turbo. Very power. Much fast. Wow.