Notices
Evo X Electrical / Audio / Security Discuss electrical and audio system upgrades or alarm configurations.

2011 GSR Carputer

Thread Tools
 
Search this Thread
 
Old Nov 2, 2011 | 02:46 PM
  #61  
TOralliart's Avatar
Evolving Member
iTrader: (8)
 
Joined: Jun 2005
Posts: 385
Likes: 0
From: SF Bay Area, CA
I've used evoscan to log but haven't used the gauges. I watch the values while logging and it is real time so I imagine the gauges are real time as well. I'll try the gauges next time my cable is hooked up.
Old Nov 2, 2011 | 08:53 PM
  #62  
Identitycrisis's Avatar
Newbie
 
Joined: May 2011
Posts: 18
Likes: 0
From: Rochester, NY
Yeah let me know about the gauges, I'm tired of trying to figure out whereni should do my AEM boost and wb.

To the OP, Did you look at any of the intel boards?
Old Nov 3, 2011 | 12:38 AM
  #63  
kazshell's Avatar
Thread Starter
Newbie
 
Joined: May 2010
Posts: 48
Likes: 0
From: San Antonio
Originally Posted by Identitycrisis
Yeah let me know about the gauges, I'm tired of trying to figure out whereni should do my AEM boost and wb.

To the OP, Did you look at any of the intel boards?
I looked at a few from the car PC sites but to be honest I didn't look at newegg or anything. I think I read the review on the board/cpu combo then ordered off amazon because they had it cheaper and they did Saturday delivery. All the other boards I saw were underpowered and didn't support HDMI. I needed the board/cpu combo to run Centrafuse, Bluetooth, music, GMPC and any other apps without stuttering. I felt this one was the best price for the power and peripheral connections.

*Be aware this board has a 24pin power connection requirement. When I bought my PW Supply I think it was a PICO originally it only had a 20pin connector. So I had to spend another $80 on the PW supply listed on the first page.
Old Nov 3, 2011 | 08:46 AM
  #64  
Identitycrisis's Avatar
Newbie
 
Joined: May 2011
Posts: 18
Likes: 0
From: Rochester, NY
Is the Garmin Moble PC just a plugin that runs with Centrafuse? Or is it a stand alone GPS software you are running?
Old Nov 3, 2011 | 11:24 AM
  #65  
kazshell's Avatar
Thread Starter
Newbie
 
Joined: May 2010
Posts: 48
Likes: 0
From: San Antonio
Originally Posted by Identitycrisis
Is the Garmin Moble PC just a plugin that runs with Centrafuse? Or is it a stand alone GPS software you are running?
Stand alone, but people have created plugins to integrate it into centrafuse.
Centrafuse does have a nav version of their own but I didn't like the layout based on the screenshots they give, but I have heard other people like it.
Old Nov 3, 2011 | 12:01 PM
  #66  
TOralliart's Avatar
Evolving Member
iTrader: (8)
 
Joined: Jun 2005
Posts: 385
Likes: 0
From: SF Bay Area, CA
Originally Posted by kazshell
Stand alone, but people have created plugins to integrate it into centrafuse.
Centrafuse does have a nav version of their own but I didn't like the layout based on the screenshots they give, but I have heard other people like it.
I hate the Centrafuse Nav. I use iGuidance with a modified AppLoader plugin. It integrates the iGuidance pretty well into Centrafuse.
Old Nov 3, 2011 | 07:41 PM
  #67  
Identitycrisis's Avatar
Newbie
 
Joined: May 2011
Posts: 18
Likes: 0
From: Rochester, NY
TOralliart are you using centrafuse 3 or 4?
Old Nov 3, 2011 | 08:03 PM
  #68  
TOralliart's Avatar
Evolving Member
iTrader: (8)
 
Joined: Jun 2005
Posts: 385
Likes: 0
From: SF Bay Area, CA
I'm using 3.5. I went to 4 but there are still some bugs to be worked out so I went back to 3.
Old Nov 3, 2011 | 09:18 PM
  #69  
Identitycrisis's Avatar
Newbie
 
Joined: May 2011
Posts: 18
Likes: 0
From: Rochester, NY
How much did they charge you to upgrade or did you have to buy it full?
Old Nov 4, 2011 | 01:11 AM
  #70  
kazshell's Avatar
Thread Starter
Newbie
 
Joined: May 2010
Posts: 48
Likes: 0
From: San Antonio
Originally Posted by Identitycrisis
How much did they charge you to upgrade or did you have to buy it full?
The base upgrade to 4 is $50 I think.

TOralliart: im glad I haven't upgraded from 3.6 if there are bugs with 4.0. Guess Ill extend my wait time to 6months before upgrading.
Old Nov 4, 2011 | 09:32 AM
  #71  
Identitycrisis's Avatar
Newbie
 
Joined: May 2011
Posts: 18
Likes: 0
From: Rochester, NY
do you guys have any ideas on a good blu-ray/DVD player?
Old Nov 4, 2011 | 04:11 PM
  #72  
kazshell's Avatar
Thread Starter
Newbie
 
Joined: May 2010
Posts: 48
Likes: 0
From: San Antonio
Originally Posted by Identitycrisis
do you guys have any ideas on a good blu-ray/DVD player?
Sorry man I don't use one, all my movies are files.
Old Nov 5, 2011 | 08:01 AM
  #73  
Identitycrisis's Avatar
Newbie
 
Joined: May 2011
Posts: 18
Likes: 0
From: Rochester, NY
yeah for a slot loaded you are gonna pay like $70, i might just end up not going with one either. My projected spendings are starting to get up there haha.
Old Nov 6, 2011 | 12:59 PM
  #74  
kazshell's Avatar
Thread Starter
Newbie
 
Joined: May 2010
Posts: 48
Likes: 0
From: San Antonio
Originally Posted by Identitycrisis
yeah for a slot loaded you are gonna pay like $70, i might just end up not going with one either. My projected spendings are starting to get up there haha.
The cables are what did me in.....I was in a rush so instead of buying online like I should have I went to best buy and radioshack. Big mistake..I probably went over $150 just because of that.
Old Nov 6, 2011 | 08:48 PM
  #75  
Identitycrisis's Avatar
Newbie
 
Joined: May 2011
Posts: 18
Likes: 0
From: Rochester, NY
TOralliart are you logging your afrs? If so how are you doing it, USB or did you tap the rear o2?


Quick Reply: 2011 GSR Carputer



All times are GMT -7. The time now is 09:39 AM.