Evo X ECU Bench Process
#21
Evolved Member
iTrader: (4)
Join Date: Feb 2008
Location: Edmonton, Alberta
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
Would be handy to have.
Right now I just have a bundle (neat, of course <-- OCD) of wires and crushed ATX wiring with pin labels. Attached to a container connected to my power supply. My own little "bench kit".
#22
yeah ditto...
obd is the main one, should be easy enough to find a female connector...
no chance of finding an ECU plug, unless I goto the wreckers
but that would be ideal, then you dont even need to pull the ECU from the car.
however this isn't something I particularly want todo a lot
obd is the main one, should be easy enough to find a female connector...
no chance of finding an ECU plug, unless I goto the wreckers
but that would be ideal, then you dont even need to pull the ECU from the car.
however this isn't something I particularly want todo a lot
#24
ok lol..
I was going to order this:
http://cgi.ebay.com/ebaymotors/Cable...Q5fAccessories
but the shipped is a bit of a rip!
so I found this:
http://cct-elec.en.made-in-china.com...ctor-Core.html
Have asked for a sample
I was going to order this:
http://cgi.ebay.com/ebaymotors/Cable...Q5fAccessories
but the shipped is a bit of a rip!
so I found this:
http://cct-elec.en.made-in-china.com...ctor-Core.html
Have asked for a sample
#29
Slightly off topic, but i would like to extend my personal gratitude to Tephra for personally coming to my aide in Melbourne "benching" my ecu after i bricked it.
Coincidently i bricked the ecu and it was stuck in the programming mode and couldn't start the car and so it happened a day before my business trip to Melbourne. So i brought the ecu all the way from Kuala Lumpur. Met Tephra in Melbourne and he had his bench kit with him, i had my tactrix cable with me and using my own laptop, i can safely say his ecu benching method works!
Now my car is up and running again!
Thanks again mate!
Coincidently i bricked the ecu and it was stuck in the programming mode and couldn't start the car and so it happened a day before my business trip to Melbourne. So i brought the ecu all the way from Kuala Lumpur. Met Tephra in Melbourne and he had his bench kit with him, i had my tactrix cable with me and using my own laptop, i can safely say his ecu benching method works!
Now my car is up and running again!
Thanks again mate!