help please ecuflash issue now car wont start
#1
help please ecuflash issue now car wont start
I went to flash my car with ecuflash and the map loaded in 100 percent according to my computer. but the car was still doing the check this and that in the center display and the fans wont stop running. What do i do. When I try to flash the car now it says error. Somthing is clicking away under the hood. I don't know what to do. Help
#4
Evolving Member
Join Date: Apr 2008
Location: New Zealand
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Follow the instructions in the link below and all will work out
http://www.evoscan.com/technical-veh...x-ecu-recovery
http://www.evoscan.com/technical-veh...x-ecu-recovery
#5
EvoM Guru
iTrader: (6)
if the flash completed properly then you have invalidated your ROM file somehow (bad definition most likely)
you will need to revert to the last known good ROM file..
however todo that you will need to bench your ECU (run a bunch of wires from the OP20 -> ECU)
there are a few threads on how todo it on here (or the above link is probably ok too)
you will need to revert to the last known good ROM file..
however todo that you will need to bench your ECU (run a bunch of wires from the OP20 -> ECU)
there are a few threads on how todo it on here (or the above link is probably ok too)
#6
EvoM Community Team
iTrader: (15)
FYI, once it says "flash complete" in the log it is not actually complete. The first time I read an Evo X I had this problem... the read timed out and I still got a popup that said complete.
You can try a full read again, just make sure it is completely done. There also used to be a menu option to pull the car out of flash mode. I'd try these before you bench it.
You can try a full read again, just make sure it is completely done. There also used to be a menu option to pull the car out of flash mode. I'd try these before you bench it.
#7
UPDATE- I benched the ecu and was able to flash in my map. Upon putting the ecu back in the car the fans still run like crazy and the check lights are popping up. PLUS THE CAR WILL NOT CRANK NOW> What is causing this?? I'm stuck really bad here. I even benched the ecu again and flashed in a generic map. Still all the same issues. HELP me please guys
Trending Topics
#10
yes first in recovery the second not. I used one of the generic maps from a thread where they gave you maps to start from when beginning to tune your x. Does anyone have an oem factory map for my car? Ill post up the id in one min after i get it from ecuflash