ETS EVO X Makes 806whp!!
#24
VP Import.
The car was right around 40psi, it takes a little more boost on a 2.0L If this was a 2.2L we would be near 900whp!
We couldn't do it with out the GSC S2 Cams
In Due Time
We run a 255 in the tank and 255 in line with 1600cc fuel injectors and the boomba fuel rail. We also have the new ETS Fuel Controller to activate the 2nd pump at set boost pressure.
Thanks!
Michael
The car was right around 40psi, it takes a little more boost on a 2.0L If this was a 2.2L we would be near 900whp!
We couldn't do it with out the GSC S2 Cams
In Due Time
Thanks!
Michael
#25
The 2.0L Motor had the following parts.
stock head casting (No Porting)
stock block casting
drop in cosworth pistons
drop in cosworth rods
cosworth bearings
ARP Head Studs
Cosworth Headgasket
GSC S2 Cams
ETS Valvetrain Components (dual springs, ti retainers, etc.)
Stock Valves
Stock Crank
stock head casting (No Porting)
stock block casting
drop in cosworth pistons
drop in cosworth rods
cosworth bearings
ARP Head Studs
Cosworth Headgasket
GSC S2 Cams
ETS Valvetrain Components (dual springs, ti retainers, etc.)
Stock Valves
Stock Crank