SSP Master Cylinder 2 (Still Issues)
#17
Newbie
Thread Starter
Join Date: Dec 2005
Location: Maryland
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
I work all day, and had a garage with tools and a compressor until i moved into a condo. Can some provide that link to the install or maybe a quick list of instructions to take it out?
#18
Newbie
iTrader: (2)
Join Date: Mar 2008
Location: Altamonte Springs, Florida
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
I have the SSP MC2 and I have not had any problems with it. I thought I had a problem with it the other day but it turns out it is my throw out bearing. Chris was very helpful. I am sure if you contact Chris that he will be able to help you out. BTW, I first replaced my MC with a stock one and paid to have that installed. I blew that one and then ordered the SSP MC2. I changed out the SSP MC myself. It is not that bad. Took me about 2 hours to change out. Get yourself a bleeder though so that you do not need someone bleeding the system while you are pumping the clutch. Also, unscrew and remove the piece on the MC that connects to the pedal before you push it through the hole in the firewall. Then screw it back on after you push it through the hole. It will make your life much easier.
Thread
Thread Starter
Forum
Replies
Last Post
vlncecast
Vendor Service / Parts / Tuning Review
15
Dec 5, 2010 08:57 PM
wilbdog
Evo X Engine / Turbo / Drivetrain
13
Mar 23, 2010 12:05 PM