Blaqops ? and complaint
#1
Evolving Member
Thread Starter
Join Date: Apr 2009
Location: kennewick wa
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Blaqops ? and complaint
Can anyone tell me what wire on my maf i need to tap into for my pump reference. By the way I cant stand it when a vender sells stuff with no support. Blaqops has crap directions that never even mention a maf setup. When i called I was told i will try to get some picks of mountings and wireing for a maf controler and never heard back and there site was not updated. From the way this thing is put together and wired i wish i would have spent my money elsewhere. They do some retarded stuff, who wires a comercial product with the main power source in a green shielded wire ? In my opinion red is for power.. and they crammed the maf senser wire into the controler and smashed it. They could have done a much cleaner job, so far i have spent more time rewireing the stuff they sent than i have the pump into the car.. If you want A CLEAN SETUP WITH GOOD DIRECTIONS THAT YOU DONT HAVE TO REWIRE Keep looking blaqops doesnt have it all quite figured out yet
Last edited by 3dman1; Aug 19, 2010 at 08:19 AM.
#2
Evolved Member
iTrader: (35)
Join Date: May 2007
Location: Austin, TX
Posts: 1,754
Likes: 0
Received 0 Likes
on
0 Posts
It's kinda hard to understand what you're trying to say. Is that all one sentence? I'd imagine that you should have some sort of basic knowledge or insight as to what you're doing when you take on an install like this.
#3
Evolved Member
iTrader: (14)
For any guys that can't firugre out what he was saying..
Can anyone tell me what wire on my maf i need to tap into for my pump reference? By the way, I cant stand it when a vender sells stuff with no support. Blaqops has crap directions that never even mention a maf setup. When i called, I was told "i will try to get some picks of mountings and wireing for a maf controler" and never herd back and there site was not updated. From the way this thing is put together and wired i wish i would have spent my money elsewhere. They do some retarded stuff. Who wires a comercial product with the main power source in a green shielded wire? In my opinion red is for power.. and they crammed the maf senser wire into the controler and smased it, when they could have done a much cleaner job. So far i have spent more time rewireing the stuff they sent than i have the pump into the car. If you want A CLEAN SETUP, WITH GOOD DIRECTIONS, THAT YOU DONT HAVE TO REWIRE, Keep looking! blaqops doesnt have it all quite figured out yet!
This is not exactly the first negative review I have seen on the Blaqops, but your post is horrific. It took me like 5 minutes to figure out what you were saying.
#5
Evolving Member
Thread Starter
Join Date: Apr 2009
Location: kennewick wa
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Sorry i was in a hurry to get to work. Yes this is for the double pumper. And i do have some basic knowledge of the install i just dont think anyone should have to fix/ rewire things on a 600 dollar part. I believe when you make a company aware of a problem in the product and or directions they should help you out, not give you lip service and then never send you the info they said they would.
#6
Evolved Member
iTrader: (1)
Join Date: Aug 2009
Location: Saint Paul
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
Chris had told me that they don't sell many MAF setups and tends to push the boost controlled model. That's probably why there isn't much documentation.
I haven't seen evidence that progressive is better than a simple Hobbs setup (like Buschurs). I think people are buying it because it sounds cool. The last I heard was that BlaqOPs doesn't want to sell their Hobbs-based kit (the EcoDub) anymore.
I haven't seen evidence that progressive is better than a simple Hobbs setup (like Buschurs). I think people are buying it because it sounds cool. The last I heard was that BlaqOPs doesn't want to sell their Hobbs-based kit (the EcoDub) anymore.
Trending Topics
#9
Evolving Member
iTrader: (5)
Join Date: Jun 2008
Location: Springfield
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
It's common for Dbl pumper kits to be messy bro, it requires a lot of time and patience. Installation by professionals is easiest. Ful Blown also sent me the same package, it also had zero directions. It's not just Blaqops.
#11
Evolved Member
iTrader: (1)
Join Date: Aug 2009
Location: Saint Paul
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
The EcoDub setup is the same type of wiring and pumps. Like I mentioned, BlaqOPs doesn't seem keen on selling the less expensive EcoDub setup anymore.