AMS 2.2L Big Bore Engine
#2
Evolving Member
iTrader: (1)
Join Date: Oct 2008
Location: West Palm Beach & Canada
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
This makes me want to go spend money
Keep this updated... I want to see what a nice 2.2L will put out with the MR... What turbo are you going to be running? And pump or E85?
Keep this updated... I want to see what a nice 2.2L will put out with the MR... What turbo are you going to be running? And pump or E85?
#5
Evolving Member
Thread Starter
Join Date: Mar 2005
Location: 900 pounds lighter than a X.
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
#6
Evolving Member
Thread Starter
Join Date: Mar 2005
Location: 900 pounds lighter than a X.
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
Thanks dan all is perfect ,AMS engine is a work of art love it. Guys here are great to! Were breaking it in on dyno today car sounds sweet!
#10
Evolved Member
iTrader: (9)
Should be good stuff, getting a 2.2 1BAMF engine assembled by Buschur for the One Lap Evo X as we speak.
I'm assuming your signature was the previous car?
Was just a bit confusing as an Evo X MR running 9's on pump most definitely hasn't been done yet, let alone 620whp on a Mustang Dyno.
My target for the MR is 550whp which will be similar to Jeremy Rohr's, we will see in a few weeks.
I'm assuming your signature was the previous car?
BUSCHUR BUILT 620 WHP PUMP GAS RECORDBUSCHUR/ICS PERFORMANCE/DYNOFLASH
This car will abolutely go 9's on straight 93. I will bet any amount of money on it. If Peter can't do it, we'll put my wheels/tires on it and put Trent in it.David Buschur.
This car will abolutely go 9's on straight 93. I will bet any amount of money on it. If Peter can't do it, we'll put my wheels/tires on it and put Trent in it.David Buschur.
My target for the MR is 550whp which will be similar to Jeremy Rohr's, we will see in a few weeks.
#13
Evolving Member
Thread Starter
Join Date: Mar 2005
Location: 900 pounds lighter than a X.
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
The wastegate was blowing open after we cranked the adjustment all the way.The motor is over running the turbo.We tried a few times to make some pulls and the HKS turbo dosen't cut it.
So i think it's time for a BBX full.So I'll call CBRD and see if he wants to strap one on and go from there.This motor moves alot of air!!
So i think it's time for a BBX full.So I'll call CBRD and see if he wants to strap one on and go from there.This motor moves alot of air!!