2010EVOGSR

Not real happy with ACT right now:

AlphaKennyBody

iTrader: (2)

Wow first person I know that has a problem with the ACT 6 Puck... Looks like error of some sort. Be it that it's driver or possible install.

Tribal

iTrader: (39)

actually the ACT clutches on the evo x suck

evokid4life

iTrader: (2)

never had an issue with my ACT 6 puck...knock on wood

murlo26

iTrader: (9)

My 6 puck works fine on my 750whp X 12k miles on it at power above 600whp and well over 500wtq.

GeeDubz

I've used the Act 6-puck and was okay. Is there a front side / back side? If so, could it have gone in wrong? How many miles did you get?

2010EVOGSR

30K on the clutch. Still has the sticker for the side to go to the flywheel on it and was installed the proper direction. As for the install Masano Mitsubishi of Reading royaly ****ed up some of the install, ie: bell housing bolt missing, driver side trans mount, once unbolted from the trans, flopped around the bolt that was never tightened, rubber plugs missing, throw out fork plug missing, clutch hydrolic line improperly routed, belly pan came off while driving it a week later. Can't say that was the reason for the failure though.

blown90camaro

sounds to me like the install was the problem..jesus...

wwevoxnj

^ I have heard many good things from friends with the same clutch and no problems.

1EvilPBx

+1 on its the installers fault

jyamona

iTrader: (8)

what exactly happened to it? not quite sure what to look at in the pic