drewm

Pretty sure my dealer zip tied it when I took mine in for recall issues.

Johnr352

iTrader: (18)

Can we make this thread sticky and be done with it?

mygsx

iTrader: (7)

Thanks, explains why my car's idle went dip and high during the drive through at Panda Express! 2 zip ties later that hose won't ever pop off again, thanks!

tripleskate

I am amazed that Mitsu let that fly from the factory, is a little band clamp too expensive?

Turbotastic

iTrader: (1)

is this still an issue for the 2013 model year? did they take care of it out of the factory yet?

Sawdust

Yes, I had to zip tie mine.

mygsx

iTrader: (7)

With my X, it caused the PO171 lean code to show, even untuned with an intake, since the ziptie, no more codes(171). She purs like a champ.

Turbotastic

iTrader: (1)

thanks, I'm going to take a look and zip tie mine today.

Ove mada

Thanks I am going to do the same

CRooKeDCoP

When you guys say ziptie. What exactly is it you are ziptying ? I don't see the hose , I see a pipe sticking out but not sure what I am supposed to clamp down. Don't wanna tighten up the wrong thing lol

Sawdust

Take a look at the very first post, on the manifold that little pipe next to the dipstick, there should be a small hose connected. If there isn't yours slipped off. If you don't see a small hose hanging nearby, then take the top plastic cover off the engine. You should see a small hose leading from the Fuel Pressure regulator that is just hanging loose, that small hose needs to be reconnected to the manifold. There is a pic on page 2 showing it connected.

CRooKeDCoP

Find it mine is still connected , how should I go about ziptying this ? Its pretty small , need 2 ?

upgeek

Thanks for posting this, looked for it and NO KIDDING, the hose was off. Fixed Immediately. Thanks for posting! Saved me a visit to the bloody dealership! Also, caused the P0171 code. Get a P0171 code, check this FIRST, before you waste your time taking it to someone that will look for this first.

Will Clamp it! Thank you brotha.

Cheers,
upgeek

mrxboosted

iTrader: (1)

My line was attached but the hose turned to plastic so I changed it out. Hard hoses can also cause leaks.

z2eV0

iTrader: (1)

Good info! i zip tied mine and it still popped off!!