Exhaust slipping off rubber hangers!
#1
Exhaust slipping off rubber hangers!
The issue is my exhaust is coming close to slipping off the rubber hangers after falling off once.
I have a AMS DP, Custom TP, and a Perrin Catback installed on an Evo X. While on the freeway back home, the rear part of the exhaust slipped off the hangers (both hangers, that is, the three holed rubber ones), luckily the bolt from the v-clamps was the only thing that dragged on the freeway saving the exhaust. I run stiff coilovers and suspect there is a lot of movement of the exhaust because the catback moves to the middle of the rubber hanger after one spirited short drive.
Seems that others may have had this issue since Torque Solutions sells this:
Any thoughts on how to resolve or is this product from torque solutions it.
I have a AMS DP, Custom TP, and a Perrin Catback installed on an Evo X. While on the freeway back home, the rear part of the exhaust slipped off the hangers (both hangers, that is, the three holed rubber ones), luckily the bolt from the v-clamps was the only thing that dragged on the freeway saving the exhaust. I run stiff coilovers and suspect there is a lot of movement of the exhaust because the catback moves to the middle of the rubber hanger after one spirited short drive.
Seems that others may have had this issue since Torque Solutions sells this:
Any thoughts on how to resolve or is this product from torque solutions it.
Last edited by dtfrost5; Oct 28, 2012 at 05:28 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mortose
Vendor Service / Parts / Tuning Review
1
Jun 26, 2016 04:23 PM
rydogg008
Evo X How Tos / Installations
11
Jan 31, 2015 06:19 PM
Jorge T
Vendor Service / Parts / Tuning Review
33
Mar 14, 2008 07:25 AM