Finally got my Evolution !! MOD check list!!
#1
Newbie
Thread Starter
Finally got my Evolution !! MOD check list!!
So here I am finally got a evolution again here's my list of Mods looking for more Ideas. Also i just like to make a shout out to ETS i was one of the first guys to Buy the T3 turbo kit back in 2008 and I still have it to this day so I'm going to be slapping it on with the GT35R. Here goes my Modds all ready on the car as well as what i have on order ready to buy.
SSS- Sight, Sound, Spoiler, package
OEM Rockford Fosgate System with Subwoofer
OEM Aero Package (Includes rear dams, side skirts, front lip, and lip on the wing)
OEM Recaro Seats
Car was tuned at Spec Ops Motorsports in Fayetteville, NC
Dyno’d at 369 awhp and 337 awtq
Oil changed every 3,000 miles with Royal Purple
More Pictures: http://imgur.com/gallery/38vLb/new
Modifications:
Engine-
Tomei Titanium Catback
Tomei Titanium Testpipe
Exedy Twin with 10,000 miles
MAP CMC with 10,000 miles
OEM Throwout Bearing with 10,000 miles
MAP O2 External Dump
Synapse BOV Replacing this BoV for the HKS Super SQV Racing Single Valve
Nisei 1pc UICP
Harman Motive 1pc LICP
ETS 4” Intercooler Getting it Black and getting a ETS stencil
ETS Intake
Hallman Pro Manual Boost Controller
Walbro 255 Fuel Pump
Blue Fuel Pump Relay
Torq Motor Mount
Tactrix Cable
Wheels & Suspension-
Bronze Volks CE28N 19x10.5 +12 Thinking about dipping it Green or Purple
Hankook V12 Evo 275/35/19
Project kics NeoChro R26 lugs
Ohlins DFV Coilovers 10k/10k
Camber F -2.5 & R -2
Rolled Rear Fenders
Whiteline Rear Sway Bar
Whiteline End Links
Interior and Exterior-
Forever Driven Triple Gauge Pod
TWM Short Shifter and Base Bushings
Carbon Fiber Shift Knob
Prosport Oil Pressure Gauge
AEM UEGO Wideband Gauge
Defi 60mm BF Boost Gauge
Defi Control Link V2
WeatherTech Floor Mats
Mynes Hood Dampers
Nokya Yellow Fog Lights
Yellow Fog Overlays
EVOLUTION X Trunk Emblem
OEM Window Visors
Rexspeed Carbon Fiber Mirror Covers
35% Tint on Front Windows
20% Tint on Rear Windows and Back Window
Also have the ETS turbo system T3 kit GT35R turbo to put on replacing the lower piping with ETS Lower pipe also and coating it all Black
Might make a Hulk theme to the car So as you know it would be white on the outside and have Rims Green or Purple Air brush the Engine Cover with a Hulk Pic or a Knight then have Rims A different White. and intercooler White n black stencil .
Order list :
HKS Super SQV Racing Single Valve
GRIMMSPEED ELECTRONIC BOOST CONTROL SOLENOID
Password:JDM Delrin Shift Knob with Blue ring!
Mishimoto Silicone Radiator Hose Kit Black
Gruppe M Ram Air Intake System - Thinking about it not fully sure!
Cobb Tuner
Mishimoto X-Line Performance Aluminum Radiator
AMS Performance Fuel Rail Kit - Black or silver
AMS Performance Fuel Pressure Regulator Kit
Colt Speed Engine Cover - Want to Air brush it Imagine would be Hulk or a Knight
Thats my List right now and also thinking about getting fuel injectors about 1200cc not sure what type just yet looking some up.
Looking for Feed back and seeing if i might have missed something or should change items before i get them thanks all and would love the help.
SSS- Sight, Sound, Spoiler, package
OEM Rockford Fosgate System with Subwoofer
OEM Aero Package (Includes rear dams, side skirts, front lip, and lip on the wing)
OEM Recaro Seats
Car was tuned at Spec Ops Motorsports in Fayetteville, NC
Dyno’d at 369 awhp and 337 awtq
Oil changed every 3,000 miles with Royal Purple
More Pictures: http://imgur.com/gallery/38vLb/new
Modifications:
Engine-
Tomei Titanium Catback
Tomei Titanium Testpipe
Exedy Twin with 10,000 miles
MAP CMC with 10,000 miles
OEM Throwout Bearing with 10,000 miles
MAP O2 External Dump
Synapse BOV Replacing this BoV for the HKS Super SQV Racing Single Valve
Nisei 1pc UICP
Harman Motive 1pc LICP
ETS 4” Intercooler Getting it Black and getting a ETS stencil
ETS Intake
Hallman Pro Manual Boost Controller
Walbro 255 Fuel Pump
Blue Fuel Pump Relay
Torq Motor Mount
Tactrix Cable
Wheels & Suspension-
Bronze Volks CE28N 19x10.5 +12 Thinking about dipping it Green or Purple
Hankook V12 Evo 275/35/19
Project kics NeoChro R26 lugs
Ohlins DFV Coilovers 10k/10k
Camber F -2.5 & R -2
Rolled Rear Fenders
Whiteline Rear Sway Bar
Whiteline End Links
Interior and Exterior-
Forever Driven Triple Gauge Pod
TWM Short Shifter and Base Bushings
Carbon Fiber Shift Knob
Prosport Oil Pressure Gauge
AEM UEGO Wideband Gauge
Defi 60mm BF Boost Gauge
Defi Control Link V2
WeatherTech Floor Mats
Mynes Hood Dampers
Nokya Yellow Fog Lights
Yellow Fog Overlays
EVOLUTION X Trunk Emblem
OEM Window Visors
Rexspeed Carbon Fiber Mirror Covers
35% Tint on Front Windows
20% Tint on Rear Windows and Back Window
Also have the ETS turbo system T3 kit GT35R turbo to put on replacing the lower piping with ETS Lower pipe also and coating it all Black
Might make a Hulk theme to the car So as you know it would be white on the outside and have Rims Green or Purple Air brush the Engine Cover with a Hulk Pic or a Knight then have Rims A different White. and intercooler White n black stencil .
Order list :
HKS Super SQV Racing Single Valve
GRIMMSPEED ELECTRONIC BOOST CONTROL SOLENOID
Password:JDM Delrin Shift Knob with Blue ring!
Mishimoto Silicone Radiator Hose Kit Black
Gruppe M Ram Air Intake System - Thinking about it not fully sure!
Cobb Tuner
Mishimoto X-Line Performance Aluminum Radiator
AMS Performance Fuel Rail Kit - Black or silver
AMS Performance Fuel Pressure Regulator Kit
Colt Speed Engine Cover - Want to Air brush it Imagine would be Hulk or a Knight
Thats my List right now and also thinking about getting fuel injectors about 1200cc not sure what type just yet looking some up.
Looking for Feed back and seeing if i might have missed something or should change items before i get them thanks all and would love the help.
#5
Newbie
Thread Starter
Whats up
Not going to toss on the turbo till I can cool the engine down enough as well as im trying to find some dudes who got that intake and see if its really worth the damn 1.9k they want for it I understand the purpose of an intaking getting cool air from outside to cool down the MAF an MAP sensor because having it in the Engine bay all im doing is drawing the air from the hot engine bay.
#6
I think it's worth it, but that's just me. There are a lot of intakes out there but IMO nothing can beat the build quality of this carbon fiber. I think seeing in person also helps.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kreeker
Evo Engine / Turbo / Drivetrain
16
May 6, 2015 06:45 AM