RATEDX

thinking about going with the redline cocktail, im assuming the 2quarts MTL and 1 quart MT90 make the 3qt total, but the service manual calls for 2.6 quarts. How do you adjust the mix of the two? How does everyone feel about this cocktail, I live in NYC so it gets pretty cold and dont do any tracking. Opinions?

ALSO: just read 8 pages of this and my head is spinning as there isnt a straight answer to anything.

http://www.evoxforums.com/forums/sho...t=36393&page=8

DO YOU HAVE TO BLEED THE SYSTEM AFTER YOU PUT THE DIAMOND ATF SPIII IN? I know the xfer case and part of the rear diff take the DIAQUEEN LSD, Im talking about the SECOND PART of the rear diff that takes the ATF SP III ( service manual is calling it the TORQUE TRANSFER MECHANISM PART)

SOMEONE PLEASE CLARIFY THIS IM BEGGING YOU

hydro334

iTrader: (4)

1 MTL, 1 MT90, then MTL for the rest.

hoobastnk90

Or just save yourself a lot of time and order MT-85 and call it a day. Works better IMO

.M.

^That's what I did. No complaints here. Works great.

RATEDX

can anyone clarify the whole bleeding thing? Need a straight answer before I do the fluid change

LetsGetThisDone

iTrader: (1)

The ATF you change on the rear diff is just a drain and fill, no bleeding. You're only draining the lubricant for the clutch pack. You're not draining the pressurized AYC system.