Boost Gauge and MBC install
#61
#63
hey ... thanks for the guide and the pics... just wondering how much lbs of boost a stock engine can handle before stuff goes wrong... I just bought my X 3 weeks ago and am new to the scene.
thanks,
Matt
Buffalo, NY
thanks,
Matt
Buffalo, NY
#65
#66
hey guys...just like the IX's. If you pull the cover off where the fuse block is under the left side of the drivers dash. The dimmer switch has multiple wires coming from the back of it. The green/white stripe wires is a dimmer wire. It's perfect to tap for illumination of gauges!
ok so if i use this wire for my Boost gauge, my Defi gauge wont be bright as the sun?? thanx for the help
#67
Step By Step:
Step 1 : Locate your factory boost controller
Step 2 : Locate Wastegate/turbo outlet vacuum line and disconnect it from the port with the solid black hose
Step 3 : Now plug it into the wastegate port on your Manual Boost Controller
Step 4 : Disconnect the other vacuum line thats connected to the hose with white stripe/marking on it coming off your factory boost controller
Step 5 : Now plug that into the intake port on your Manual Boost Controller
Step 6 : Mount your Manual Boost Controller in a secure location
Step 1 : Locate your factory boost controller
Step 2 : Locate Wastegate/turbo outlet vacuum line and disconnect it from the port with the solid black hose
Step 3 : Now plug it into the wastegate port on your Manual Boost Controller
Step 4 : Disconnect the other vacuum line thats connected to the hose with white stripe/marking on it coming off your factory boost controller
Step 5 : Now plug that into the intake port on your Manual Boost Controller
Step 6 : Mount your Manual Boost Controller in a secure location
#68
One question....Why does everyone care about bypassing EBCS to install an MBC? Thats like disconnecting the driveshaft to make the car FWD. Its backwards. I strongly advise against using an MBC and either tuning the OEM EBCS's or getting the GrimmSpeed or GM 3-port EBC and install that and tune with that instead. All these cars need tunes anyways straight from Mitsu so if you wanna play with boost, go that route. The GM solenoid is ~$70.00.
Just a tip
Just a tip
Thread
Thread Starter
Forum
Replies
Last Post
Jameson_IXMR
Evo How To Requests / Questions / Tips
21
Dec 11, 2016 07:33 PM
WTB[MidWest]: RED Mishimoto radiator hoses or any other RED hoses
TxFAkuma
For Sale - Engine / Drivetrain / Power
0
Aug 9, 2015 08:01 PM