Has any Evo X owner ever installed this intercooler piping and intake on?
http://www.speedaction.net/inkitcoairin.html

 

are you thinking in tunning in the future? a new intake without a tune in our car is a piece of s****
if you are thinking in Cobb AP you better select one of the Intakes that they have maps already for it.
if you are going to tune with an open source, it looks like a good deal.

 

No, i mean ive tried to install the lower intercooler piping, but im having some trouble. I need some help because i dont think i was fabricated correctly.

 

Can you snap some photos? I mean, it's either going to fit or it's not.

Do you have the entire front bumper off?

Do you have an MR or a GSR? IIRC, the LICP has to be different (or made universal) to fit the MRs.

 

i took the whole front bumper off homie. it just does not fit. and i cant get a hold of these people from speedaction motorsports to give me some kind of tip. it is a MR edition. The item is for all evos so it says.

 

The MR has a Tranny Cooler on the driver side which the GSR does not. that might be a problem you are having? which pipe are u haveing a problem with? the Intake or the LICP?

 

both the intake and the lower piping wont fit threw.

 

I think that your kit must be made for a GSR. That would explain why those wouldn't fit. Like the OP's said, the MRs have a tranny cooler.

 

only the upper intercooler pipe will work, the cold air will not fit due to the tranny cooler as well as the LICP

 

looks like a pos go with ETS money well spent

 

removed

 

removed. Assumed this was about AMS pipes for some reason. sorry