stock bov install
May 14, 2016, 07:53 PM
#1
Newbie
Thread Starter
stock bov install
hello new here,
so I bought an evo x with an already installed Greddy FV BOV. My question is not sure how to install the stock bov back on since I see a pipe blocked and couple of hoses changed around
. searched for stock bov install and figured I would get no luck.
any advise?
so I bought an evo x with an already installed Greddy FV BOV. My question is not sure how to install the stock bov back on since I see a pipe blocked and couple of hoses changed around
. searched for stock bov install and figured I would get no luck.any advise?
May 18, 2016, 12:57 PM
#3
Newbie
Thread Starter
the greddy bov has a flange connected the the uicp. I'm guessing I have to remove the flange. then install the original bov hose and just connect the two blocked hoses? also connect the blue hose from greddy to original bov?
May 18, 2016, 04:07 PM
#7
if u want it back to stock bpv, ur going to have to find the stock upper piece that your missing (yours is modded to attached the greddy) and the long bov inlet.
you can just replace the entire upper piece with an aftermarket hard pipe as well but u still need to find the bpv inlet.
if u have all those, just simply uncap the 2 caps and attach the stock routing. and put in the expander piece where the greddy piece currently sits.
connect the current blue vac hose to the oem unit and should be set. the outlet of the oem bpv goes into the injen intake thats currently capped off.
you can just replace the entire upper piece with an aftermarket hard pipe as well but u still need to find the bpv inlet.
if u have all those, just simply uncap the 2 caps and attach the stock routing. and put in the expander piece where the greddy piece currently sits.
connect the current blue vac hose to the oem unit and should be set. the outlet of the oem bpv goes into the injen intake thats currently capped off.
Trending Topics
May 19, 2016, 01:11 PM
#8
Newbie
Thread Starter
if u want it back to stock bpv, ur going to have to find the stock upper piece that your missing (yours is modded to attached the greddy) and the long bov inlet.
you can just replace the entire upper piece with an aftermarket hard pipe as well but u still need to find the bpv inlet.
if u have all those, just simply uncap the 2 caps and attach the stock routing. and put in the expander piece where the greddy piece currently sits.
connect the current blue vac hose to the oem unit and should be set. the outlet of the oem bpv goes into the injen intake thats currently capped off.
you can just replace the entire upper piece with an aftermarket hard pipe as well but u still need to find the bpv inlet.
if u have all those, just simply uncap the 2 caps and attach the stock routing. and put in the expander piece where the greddy piece currently sits.
connect the current blue vac hose to the oem unit and should be set. the outlet of the oem bpv goes into the injen intake thats currently capped off.
Thanks for the info! Just finished it today and will now be posting in the market section to sell the bov lol
Thread
Thread Starter
Forum
Replies
Last Post
BlackOperative
Evo Engine / Turbo / Drivetrain
5
Apr 6, 2012 09:38 AM
dvd_mi
Evo Engine / Turbo / Drivetrain
16
Nov 19, 2009 05:27 PM
Evo9tunerz
For Sale - Wanting To Buy (WTB) Or Trade (WTT)
1
Dec 2, 2007 07:14 AM
ec999
For Sale - Wanting To Buy (WTB) Or Trade (WTT)
4
Apr 6, 2005 08:43 PM