Do Luck and JUN Combo Exterior Mods on my X
#1
Do Luck and JUN Combo Exterior Mods on my X
Just finished putting on my JUN sides and Do Luck front lip on the X last week. Here's a couple of pics that I had my friend take for me just before it started to storm yesterday. I'll try to have him take some better pics for me soon. I only have a crappy point and shoot.
A brief review of the mods...
Do Luck CF Trunk- Fits very good. No adjustment/alignment was needed. All holes were pre-drilled for the harness. I installed this on my X for a few months now. I am very satisfied that Do Luck made the trunk strong enough to incorperate the stock struts to work without having to change them for lighter struts. Always had a problem with using factory struts on other CF aero for my previous cars.
Do Luck CF front lip- This lip fits like a glove. All holes were pre-drilled and all factory hardware was used for the install. No double sided tape was needed.
JUN CF Sides: Very good fitment. Holes were pre-drilled and hardware was included. I had to take off the factory sides to install 2 screws, one in the front and rear. The sides will crack if someone steps on it by accident though. I wish JUN would of figured out a way to make it more sturdy.
JUN CF Mirrors: Had this on the car for a few months as well. Fitment is very good. But the stalk that holds the mirror is starting to get loose causing the mirror to be easily moved. I'm going to see if I can find a way to make it more stiff. Mirrors will not allow you to see the curb when parking. Other than that, I have no other issues like changing lanes etc.
Update: Fixed the issue...Had to adjust the rubber pieces as they were not seated correctly.
This pic is a blurry but its the only pic my friend took of the rear before it started to pour.
Last pic before the pouring started.
***UPDATE PICS***
Here are some new pics I took the other day.
A brief review of the mods...
Do Luck CF Trunk- Fits very good. No adjustment/alignment was needed. All holes were pre-drilled for the harness. I installed this on my X for a few months now. I am very satisfied that Do Luck made the trunk strong enough to incorperate the stock struts to work without having to change them for lighter struts. Always had a problem with using factory struts on other CF aero for my previous cars.
Do Luck CF front lip- This lip fits like a glove. All holes were pre-drilled and all factory hardware was used for the install. No double sided tape was needed.
JUN CF Sides: Very good fitment. Holes were pre-drilled and hardware was included. I had to take off the factory sides to install 2 screws, one in the front and rear. The sides will crack if someone steps on it by accident though. I wish JUN would of figured out a way to make it more sturdy.
JUN CF Mirrors: Had this on the car for a few months as well. Fitment is very good. But the stalk that holds the mirror is starting to get loose causing the mirror to be easily moved. I'm going to see if I can find a way to make it more stiff. Mirrors will not allow you to see the curb when parking. Other than that, I have no other issues like changing lanes etc.
Update: Fixed the issue...Had to adjust the rubber pieces as they were not seated correctly.
This pic is a blurry but its the only pic my friend took of the rear before it started to pour.
Last pic before the pouring started.
***UPDATE PICS***
Here are some new pics I took the other day.
Last edited by Tantrum X; Sep 24, 2009 at 07:19 PM. Reason: Added more pictures
#4
Evolved Member
iTrader: (8)
Join Date: Dec 2007
Location: Boise, ID ->>> Concord, CA
Posts: 1,218
Likes: 0
Received 2 Likes
on
2 Posts
Awesome! The Do-Luck lip is my absolute favorite When you take some more pics, if you could get a close up shot of the lip in some better lighting, I would very much appreciate it (I also have a PB X). & is the weave a 1x1 or 2x2?