acezone

hi! after reading a lot of posts I decided to go with a 18x10.5 15 with 275/35..Im planning on rolling the fenders and Ive already installed the eibach pro kit..I just want to know the usual camber settings for the front and rear that works for the ones with the same setup..tia!

linkbeat

Not using a center cap at all is the option I'm thinking of going with. Haven't heard any confirmation on compatibility with other caps.

Noe18

iTrader: (4)

18x10 set ups??????

mpboost

iTrader: (1)

18x9.5 +15 RPF1's

265/35/18 Dunlop Direzza Star Spec's

Lowered on Ohlins Road and Track coilovers. Had it corner weighted, balanced, aligned. Running 0* toe front and rear, -2.6* front camber, -2* rear camber (+mild fender roll). If I didn't drive it on the street I would go more aggressive for the front camber, but as is, this is my favorite compromise for street and autocross driving.

http://www.flickr.com/photos/mpboost/6273989605/http://www.flickr.com/photos/mpboost/6273989605/ by http://www.flickr.com/people/mpboost/, on Flickr

http://www.flickr.com/photos/mpboost/6274514884/http://www.flickr.com/photos/mpboost/6274514884/ by http://www.flickr.com/people/mpboost/, on Flickr

http://www.flickr.com/photos/mpboost/6274515692/http://www.flickr.com/photos/mpboost/6274515692/ by http://www.flickr.com/people/mpboost/, on Flickr

Levar

iTrader: (85)

If any of you fellahs know of anyone that is looking for some RPF1s I have a set in 18 x 9.5 that I am looking to either sell or trade outright. They have been professionally powder coated black here in Arizona. They are a bit too wide for my liking. I am looking for something either 18 x 8.0 or 18 x 8.5. Please discuss what you have and know via PM to prevent this thread from getting cluttered with off topic information.

genrec

iTrader: (2)

Very clean. Looks great.

JACOB3RD

Finally a silver x on silver rpf1s!!! Amazing! If i were you i would consider going with a big wing or wingless.

awilli1715k

iTrader: (1)

Here are my RPF1. Had a photoshoot yesterday friend of mine Mark took some great pics of my ride.

18x9.5 15 silver on 245/40/18 Falkens

Hikaru

iTrader: (3)

^^^Very very classy! I was waiting to see updated pics in your other post, RPF1 in silver looks sick on white, which is why I'll be picking up a set

Why did you go with 245/40 and not 265/35 on the 9.5 inch wheel?

The lugs will match well when the hood is up too.

cmsjunior

[QUOTE=awilli1715k;9978696]Here are my RPF1. Had a photoshoot yesterday friend of mine Mark took some great pics of my ride.

18x9.5 15 silver on 245/40/18 Falkens

Congrats, man... your Evo looks perfect! After looking at your pictures I decided to have the same setup in my car. Now I just need to find a store that can ship 4 RPF1's down to Brazil as we do not find these wheels over here.

Did you use aftermarket lugnuts and hub rings?

Levar

iTrader: (85)

It looks like I have to unsubscribe from this thread as I have officially sold my RPF1s. I will now be running some Konig Deception wheels for the time being.

EBEVOIX

iTrader: (5)

I'd just installed them and took pics. I actually had to raise the front 3/4 of an inch after 2 weeks because it was too low for me. I couldn't even get a jack underneath the front or sides!

awilli1715k

iTrader: (1)

No hubcentric rings but the lugs are drop engineering after market lugs

2snail

did you have to roll your fenders? does it rub at all? did you get a Roll Center Kit for drop?

awilli1715k

iTrader: (1)

It does rub in the front... I'm not sure if its hitting the mudflaps or the plastic liner up on the front fenders